Tons of 2nd gen parts have to go NOW!

**hughes46** · 1-28-08, 21:21

I am trying to DRASTICALLY reduce the amount of stuff I have and need to move it. Whatever doesn't sell here will go to ebay and then to the scrap pile, so, no REASONABLE offers will be refused and I WILL CONSIDER TRADES for just about anything not car related (ipods, wii's, xbox 350 stuff, ps3's, home theater, burton snowboard stuff, etc). Here is the link to my photobucket album:

hughes46/parts - Photobucket - Video and Image Hosting

Those are pics of only a few of the parts available. If you don't see a pic of what you want in the 9 pages, just ask me. I have just about any black plastic interior part (except leather interior door and quarter cards) that you might need as well. I KNOW I don't have any good v6 mtx trannys or power antennas btw.

Prices do not include shipping. Please keep in mind that shipping expenses depend as much on weight as size. For SMALL packages and international shipping, I use primarily usps priority mail (usually under $10 to ship domestically and under $30 to Canada (again, depends on the size and weight) . For larger and heavier packages, I use fedex. If you want an engine or a tranny, I generally will only arrange shipping if you are in a surrounding state of MN. If you arrange your own shipping, I am fine with that as well.

SUSPENSION, RIMS, TIRES, BRAKES:
lower control arms - $10
fd rims and nearly new toyo tires and spacers - $450 - SOLD
95 ls rim (b condition) - $15
front springs - $10 set
turn signal combination switches - $5
jacks - $1
tire iron - $1
abs pumps - $2
new front calipers - $25ea

INTERIOR PARTS:
heater controls - $2
dash cubbys - $2
tan 3rd brake lite assemblies - $3
black 3rd brake lite assemblies - $5
tan door pull surrounds - $1
black door pull surround - $2
tan sunroof switch assemblies - $5
visors - $3ea
interior fuse box covers - $3
sunroof assembly - $30
black carpet - $20
black seatbelts - $4/per belt
93 tan leather rear seats - $25
pass. side tan airbag - $10
driver's side airbags - $5ea
window regulators - $10ea
black door release levers - $2ea
dash switches - $1ea
misc. black interior plastic - $3/piece
leather ls steering wheels - $2
black center arm rests - $5
tan center arm rests - $3
sunroof motors - $10
black leather rear seats - $30 - SOLD
front door speaker mounts - $1ea
95 and up airbag control modules - $5
upper dash trim bezels - $15
mazda 3 disc changer - $25

2.5L V6 DRIVETRAIN PARTS:
white coolant resv. - $2
2.5l alternator - $10
2.5l dipstick - $10
2.5l ac compressor - $20
mtx shift linkage - $10
2.5l power steering pump - $5
ecu's - $15ea (need your part #)
timing belt covers - $2ea
black overflow tanks (radiator mounted) - $15 (I only have two) - SOLD
new oem valve cover gaskets - $25/per gasket
passenger side engine splash shields - $10ea
driver's side engine splash shields - $5ea
2.5l airflow meters - $3ea
2.5l throttle body (no tps) - $5ea
2.5l tps - $10
93-94 2.5l egr valves - $4ea
trans braces - $5ea
2.5l intake elbow - $15 (only have one good one)
2.5l crank - $20
2.5l atx transmission from a 96 M-edition - $100
2.5l crank shaft pulleys - $5ea
engine bay fuse box covers - $1
mtx shift linkages - $5
2.5l front valve covers - $10
2.5l rear valve covers - $5
battery trays and hold down block - $3 (you may need to find your own bolt though)
driver's side engine splash shield - $1ea
2.5l mtx starters - $15
2.5l atx starters - $2

2.0L I4 DRIVETRAIN PARTS:
i4 alternator - $10 (only have one)
i4 intake manifold - $15
i4 atx transmission - $100
i4 airflow meters - $5ea - SOLD
i4 valve covers - $10

AFTERMARKET PARTS AND MISC. :
hydraulics setup - $400 - SOLD
stainless sway bar links - $60
new red pedal pads - $10
new rear wing - $25 - SOLD
new side skirts - $40 - SOLD
dyno tune nitrous timer - $25 - SOLD
test pipe - $5 - SOLD
right hand drive conversion setup - $500
chrome b-pillar bar with extinguisher - $25
tube b-pillar bar - $5
front strut brace - $10 - SOLD
aftermarket shift knob - $3

EXTERIOR BODY/LIGHT PARTS:
yellow bumper lights - $2ea
red bumper lights - $2ea
gas cover doors - $3ea
chrome emblems- $1ea
oem wings (missing led brakelight) - $5
pass. rear m-edition all red tail light - $15
right fog lights - $10ea
back window trim - $10
mirrors - $5ea
trunk latch trim - $2
doors, deck lids, fenders, glass, etc.......

I ALSO HAVE 3 MORE OR LESS COMPLETE PARTS CARS AND HUNDREDS (IF NOT THOUSANDS) OF OTHER PARTS NOT PICTURED.

**D'sMx-6** · 1-29-08, 0:16

hey Mike, my buddy's tranny is going out on his 93 LS ATX. Will the M-Edition tranny work with his car even though it's OBD II. I'm assuming so but I just want to make sure. I might buy a set of black seatbelts as well from you. You also have new front calipers? I'll take those if they are really new as long as a dash cubby. Do you have a black glove box by chance. I'll also take any miscellaneous black interior pieces that you don't wawnt like the rear speaker grills, dash vents, and things like that.

**hughes46** · 1-29-08, 6:55

D'sMx-6 - yes, the tranny will work in his 93. I can also ship to Wisconsin for about $100 (which might be cheaper than you driving here and back).

**harbison07** · 1-29-08, 11:21

just wondering if you still havet the 2,5l intake I would like to takethat off your hands let me know price

**hughes46** · 1-29-08, 12:04

harbison07 - Yes, I have a good one yet. I'll update the thread with "sold" after I am out of stock on each given part. I can ship either usps priority mail (cost about $8) or fedex for $10. Either way is fine with me.

**kid_puma** · 1-29-08, 13:26

pm'd

~kp

**SlammedSix** · 1-29-08, 15:06

Hughes i have a weird part to ask for....but here it goes.

On the 2.5 MTX the steel pivot ball that screws on the tranny, Mine broke off and i need just that steel ball, where the shift fork snaps onto to pivot. Please let me know if you could sell me just that part.

Also if you have any good working 2.5 liter alternators. I need one. How much for both shipped?

**hughes46** · 1-29-08, 15:29

SlammedSix - how about $30 for both INCLUDING the shipping.

**MaDkAtT44** · 1-29-08, 16:41

Do you have V6 engine/engine to ECU wiring harness for a 93 MTX? Is the timing cover damaged in any way?

Thankz

**hughes46** · 1-29-08, 17:26

I know I have the engine harness, but I'll have to check on an mtx ecu harness. I'll TRY and get that done tomorrow.

cf_z · 1-29-08, 17:28

got a PM from me !

LightBlade · 1-29-08, 18:27

Would you be willing to ship the rear wing?

**hughes46** · 1-29-08, 18:42

LightBlade - of course I'll ship a wing. Which one are you interested in?

**T-Money** · 1-29-08, 18:43

what kind of side skirts do you have

**T-Money** · 1-29-08, 18:46

also do you have the rear plastic deck without the 3rd brake light

1-28-08, 21:21	#1 (permalink)
hughes46 Join Date: Feb 2002 Location: St. Clair, Minnesota, MN iTrader: (26)	Tons of 2nd gen parts have to go NOW! I am trying to DRASTICALLY reduce the amount of stuff I have and need to move it. Whatever doesn't sell here will go to ebay and then to the scrap pile, so, no REASONABLE offers will be refused and I WILL CONSIDER TRADES for just about anything not car related (ipods, wii's, xbox 350 stuff, ps3's, home theater, burton snowboard stuff, etc). Here is the link to my photobucket album: hughes46/parts - Photobucket - Video and Image Hosting Those are pics of only a few of the parts available. If you don't see a pic of what you want in the 9 pages, just ask me. I have just about any black plastic interior part (except leather interior door and quarter cards) that you might need as well. I KNOW I don't have any good v6 mtx trannys or power antennas btw. Prices do not include shipping. Please keep in mind that shipping expenses depend as much on weight as size. For SMALL packages and international shipping, I use primarily usps priority mail (usually under $10 to ship domestically and under $30 to Canada (again, depends on the size and weight) . For larger and heavier packages, I use fedex. If you want an engine or a tranny, I generally will only arrange shipping if you are in a surrounding state of MN. If you arrange your own shipping, I am fine with that as well. SUSPENSION, RIMS, TIRES, BRAKES: lower control arms - $10 fd rims and nearly new toyo tires and spacers - $450 - SOLD 95 ls rim (b condition) - $15 front springs - $10 set turn signal combination switches - $5 jacks - $1 tire iron - $1 abs pumps - $2 new front calipers - $25ea INTERIOR PARTS: heater controls - $2 dash cubbys - $2 tan 3rd brake lite assemblies - $3 black 3rd brake lite assemblies - $5 tan door pull surrounds - $1 black door pull surround - $2 tan sunroof switch assemblies - $5 visors - $3ea interior fuse box covers - $3 sunroof assembly - $30 black carpet - $20 black seatbelts - $4/per belt 93 tan leather rear seats - $25 pass. side tan airbag - $10 driver's side airbags - $5ea window regulators - $10ea black door release levers - $2ea dash switches - $1ea misc. black interior plastic - $3/piece leather ls steering wheels - $2 black center arm rests - $5 tan center arm rests - $3 sunroof motors - $10 black leather rear seats - $30 - SOLD front door speaker mounts - $1ea 95 and up airbag control modules - $5 upper dash trim bezels - $15 mazda 3 disc changer - $25 2.5L V6 DRIVETRAIN PARTS: white coolant resv. - $2 2.5l alternator - $10 2.5l dipstick - $10 2.5l ac compressor - $20 mtx shift linkage - $10 2.5l power steering pump - $5 ecu's - $15ea (need your part #) timing belt covers - $2ea black overflow tanks (radiator mounted) - $15 (I only have two) - SOLD new oem valve cover gaskets - $25/per gasket passenger side engine splash shields - $10ea driver's side engine splash shields - $5ea 2.5l airflow meters - $3ea 2.5l throttle body (no tps) - $5ea 2.5l tps - $10 93-94 2.5l egr valves - $4ea trans braces - $5ea 2.5l intake elbow - $15 (only have one good one) 2.5l crank - $20 2.5l atx transmission from a 96 M-edition - $100 2.5l crank shaft pulleys - $5ea engine bay fuse box covers - $1 mtx shift linkages - $5 2.5l front valve covers - $10 2.5l rear valve covers - $5 battery trays and hold down block - $3 (you may need to find your own bolt though) driver's side engine splash shield - $1ea 2.5l mtx starters - $15 2.5l atx starters - $2 2.0L I4 DRIVETRAIN PARTS: i4 alternator - $10 (only have one) i4 intake manifold - $15 i4 atx transmission - $100 i4 airflow meters - $5ea - SOLD i4 valve covers - $10 AFTERMARKET PARTS AND MISC. : hydraulics setup - $400 - SOLD stainless sway bar links - $60 new red pedal pads - $10 new rear wing - $25 - SOLD new side skirts - $40 - SOLD dyno tune nitrous timer - $25 - SOLD test pipe - $5 - SOLD right hand drive conversion setup - $500 chrome b-pillar bar with extinguisher - $25 tube b-pillar bar - $5 front strut brace - $10 - SOLD aftermarket shift knob - $3 EXTERIOR BODY/LIGHT PARTS: yellow bumper lights - $2ea red bumper lights - $2ea gas cover doors - $3ea chrome emblems- $1ea oem wings (missing led brakelight) - $5 pass. rear m-edition all red tail light - $15 right fog lights - $10ea back window trim - $10 mirrors - $5ea trunk latch trim - $2 doors, deck lids, fenders, glass, etc....... I ALSO HAVE 3 MORE OR LESS COMPLETE PARTS CARS AND HUNDREDS (IF NOT THOUSANDS) OF OTHER PARTS NOT PICTURED. Last edited by hughes46 : 2-28-08 at 7:38.
	mhughes@hickorytech.net for paypal Shipping address: Mike Hughes, 109 E. LeRay Ave., P.O. Box 363, Eagle Lake, MN 56024 cardomain: http://www.cardomain.com/ride/657895 My website: www.hickorytech.net/~mhughes1

1-29-08, 0:16	#2 (permalink)
D'sMx-6 Overhaulin' the 6 Join Date: Jan 2006 Location: milwaukee, WI, USA Age: 21 iTrader: (1)	hey Mike, my buddy's tranny is going out on his 93 LS ATX. Will the M-Edition tranny work with his car even though it's OBD II. I'm assuming so but I just want to make sure. I might buy a set of black seatbelts as well from you. You also have new front calipers? I'll take those if they are really new as long as a dash cubby. Do you have a black glove box by chance. I'll also take any miscellaneous black interior pieces that you don't wawnt like the rear speaker grills, dash vents, and things like that. Last edited by D'sMx-6 : 1-29-08 at 0:47.
	97 C8 MX6 LS-S : Supercharged StreetThisMx6's motor, HP's and Eibach's, AWR suspension components, FD's and J-specs, etc... Yeah it's nice

1-29-08, 6:55	#3 (permalink)
hughes46 Join Date: Feb 2002 Location: St. Clair, Minnesota, MN iTrader: (26)	D'sMx-6 - yes, the tranny will work in his 93. I can also ship to Wisconsin for about $100 (which might be cheaper than you driving here and back).
	mhughes@hickorytech.net for paypal Shipping address: Mike Hughes, 109 E. LeRay Ave., P.O. Box 363, Eagle Lake, MN 56024 cardomain: http://www.cardomain.com/ride/657895 My website: www.hickorytech.net/~mhughes1

1-29-08, 12:04	#5 (permalink)
hughes46 Join Date: Feb 2002 Location: St. Clair, Minnesota, MN iTrader: (26)	harbison07 - Yes, I have a good one yet. I'll update the thread with "sold" after I am out of stock on each given part. I can ship either usps priority mail (cost about $8) or fedex for $10. Either way is fine with me.
	mhughes@hickorytech.net for paypal Shipping address: Mike Hughes, 109 E. LeRay Ave., P.O. Box 363, Eagle Lake, MN 56024 cardomain: http://www.cardomain.com/ride/657895 My website: www.hickorytech.net/~mhughes1

1-29-08, 13:26	#6 (permalink)
kid_puma Join Date: Aug 2003 Location: Ottawa,Ontario (Nations Capital), Canada Age: 25 iTrader: (1)	pm'd ~kp
	© *MX6.COM*

1-29-08, 11:21	#4 (permalink)
harbison07 Join Date: May 2007 Location: Farmington, NH, USA iTrader: (0)	just wondering if you still havet the 2,5l intake I would like to takethat off your hands let me know price

1-29-08, 15:06	#7 (permalink)
SlammedSix Join Date: Jan 2002 Location: Oxnard, Ca Age: 25 iTrader: (2)	Hughes i have a weird part to ask for....but here it goes. On the 2.5 MTX the steel pivot ball that screws on the tranny, Mine broke off and i need just that steel ball, where the shift fork snaps onto to pivot. Please let me know if you could sell me just that part. Also if you have any good working 2.5 liter alternators. I need one. How much for both shipped?
	*D-Tuned Custom KL MX-3 On Nitrous*

1-29-08, 15:29	#8 (permalink)
hughes46 Join Date: Feb 2002 Location: St. Clair, Minnesota, MN iTrader: (26)	SlammedSix - how about $30 for both INCLUDING the shipping.
	mhughes@hickorytech.net for paypal Shipping address: Mike Hughes, 109 E. LeRay Ave., P.O. Box 363, Eagle Lake, MN 56024 cardomain: http://www.cardomain.com/ride/657895 My website: www.hickorytech.net/~mhughes1

1-29-08, 16:41	#9 (permalink)
MaDkAtT44 Join Date: Dec 2006 Location: Okville, Canada Age: 20 iTrader: (1)	Do you have V6 engine/engine to ECU wiring harness for a 93 MTX? Is the timing cover damaged in any way? Thankz Last edited by MaDkAtT44 : 1-29-08 at 16:45.
	'93 MX6 ZE Dark Force CAI, lightened Flywheel, 2nd stage clutch, walbro, FPR, and J-spec VAF/ECU Doing the Research for FI...Coming Soon 2" lower kit for sale almost new ask for details

1-29-08, 17:26	#10 (permalink)
hughes46 Join Date: Feb 2002 Location: St. Clair, Minnesota, MN iTrader: (26)	I know I have the engine harness, but I'll have to check on an mtx ecu harness. I'll TRY and get that done tomorrow.
	mhughes@hickorytech.net for paypal Shipping address: Mike Hughes, 109 E. LeRay Ave., P.O. Box 363, Eagle Lake, MN 56024 cardomain: http://www.cardomain.com/ride/657895 My website: www.hickorytech.net/~mhughes1

1-29-08, 17:28	#11 (permalink)
cf_z Join Date: Sep 2007 Location: Fort Wayne, IN, USA Age: 18 iTrader: (8)	got a PM from me !
	MY SIX, since-day-one. WTB: South Bend or Clutchmasters Clutch. PM me with what you have. g-meter'd at 65 HP haller.

1-29-08, 18:27	#12 (permalink)
LightBlade Join Date: Jun 2007 Location: Bradenton, FL, USA Age: 20 iTrader: (0)	Would you be willing to ship the rear wing?

1-29-08, 18:42	#13 (permalink)
hughes46 Join Date: Feb 2002 Location: St. Clair, Minnesota, MN iTrader: (26)	LightBlade - of course I'll ship a wing. Which one are you interested in?
	mhughes@hickorytech.net for paypal Shipping address: Mike Hughes, 109 E. LeRay Ave., P.O. Box 363, Eagle Lake, MN 56024 cardomain: http://www.cardomain.com/ride/657895 My website: www.hickorytech.net/~mhughes1

1-29-08, 18:43	#14 (permalink)
T-Money Join Date: Dec 2006 Location: Liberty, MO, USA Age: 23 iTrader: (0)	what kind of side skirts do you have
	94 mx-6 LS-ZE: R.I.P. NEW!! 06 Mustang: 20 inch gunmetal American racing Shelby torque thrust rims staggered

1-29-08, 18:46	#15 (permalink)
T-Money Join Date: Dec 2006 Location: Liberty, MO, USA Age: 23 iTrader: (0)	also do you have the rear plastic deck without the 3rd brake light
	94 mx-6 LS-ZE: R.I.P. NEW!! 06 Mustang: 20 inch gunmetal American racing Shelby torque thrust rims staggered