I will buy:
-TB boot (Assuming its in good condition)
-The pcv plugs into the valve cover, the rubber garment that holds the pcv tube, how much for that? (Mine keeps blowing off when I hit boost, thus oil all inside my engine bay )
-Or Hell, the whole Valve Cover
-Compressor side tube that goes from the turbo to the bypass valve
-The cap at the end of the fuel rail closest to cylinder #1 (So I can tap it out and put a nipple in it for a better FPR setup)
And will possibly buy, after I see your prices:
-Exhaust Manifold
-VAF
-The Pretty Blue Spark Plug Wires
I will buy:
-TB boot (Assuming its in good condition)
-The pcv plugs into the valve cover, the rubber garment that holds the pcv tube, how much for that? (Mine keeps blowing off when I hit boost, thus oil all inside my engine bay )
-Or Hell, the whole Valve Cover
-Compressor side tube that goes from the turbo to the bypass valve
-The cap at the end of the fuel rail closest to cylinder #1 (So I can tap it out and put a nipple in it for a better FPR setup)
And will possibly buy, after I see your prices:
-Exhaust Manifold
-VAF
-The Pretty Blue Spark Plug Wires
what, was my ghetto turbo to bpv not good enough for you?
ill pull this all later as well, as i have a [shizzle] load to pull already. just to let you know though, since i have 3 vafs now its gonna be cheap. id practically give them away at this point as they are hard to sell.
what, was my ghetto turbo to bpv not good enough for you?
ill pull this all later as well, as i have a [shizzle] load to pull already. just to let you know though, since i have 3 vafs now its gonna be cheap. id practically give them away at this point as they are hard to sell.
ba-haha that coolant tube was legit, but I like to have backups! well, you have my information, let me know how much, pm me when you have some time and have some figures, then we will go from there.
sorry to everyone who was waiting on replies about parts today, but i was sick so i didn't get a chance to do much today but clean old parts out of my closet.
Hows the driver side window motor and regulator? If it works I will buy it. And I might need some of the power steering lines, I cant find my old ones.
-Rick- 88 MX6 GTCeleste Boosted on an Electromotive TECII standalone. FE-DOHC rebuild 198kw, 393Nm/ @ 1.04 bar
Quote:
This is a little-visited and quite esoteric area of the site...
how much for the driver window switch n rear strutbar if it has one
window switch works well but RSTB was sold
Quote:
Originally Posted by JosephArocha
how about your turbo and air system?
and the speedometer cable.
turbo is in good shape for 214k miles. speedometer gear's mount is broke but cable is in good shape
Quote:
Originally Posted by F1 MCL
I will buy:
-TB boot (Assuming its in good condition)
-The pcv plugs into the valve cover, the rubber garment that holds the pcv tube, how much for that? (Mine keeps blowing off when I hit boost, thus oil all inside my engine bay )
-Or Hell, the whole Valve Cover
-Compressor side tube that goes from the turbo to the bypass valve
-The cap at the end of the fuel rail closest to cylinder #1 (So I can tap it out and put a nipple in it for a better FPR setup)
And will possibly buy, after I see your prices:
-Exhaust Manifold
-VAF
-The Pretty Blue Spark Plug Wires
TB boot is in good shape
the PCV valve/gasket and valve cover gasket are almost brand new (3kish miles)
the exhaust mani is in good shape but one of the bolts on the passenger side is stripped so getting it off will be trouble.
the NGK's have about 15k miles on them and they are connected to iridiums(2k miles) if you are interested in those too
Quote:
Originally Posted by RbluEMx6
Hows the driver side window motor and regulator? If it works I will buy it. And I might need some of the power steering lines, I cant find my old ones.
the window motors work well and go up and down almost like new.
kalob has the car so you will need to PM him. I would think in the neighborhood of 50-75 shipped but I don't know how hard it is to pull and the weight.
high flow cat, 21/2" cat back, matrix filter (heatshield) , adam ecu, dual pipe mozart muffler.
front intercooler(not install), turbo upgrade on is way, new head, pistons and more for a engine rebuild .
My friend is curious about the spedometer unit, how much for it?
Thanks again man.
figuring shipping for everything to get you a nice size goodie box
looking at around 150-200 shipped for everything you have mentioned(minus exhaust mani till I know it can be pulled
depending on size of box I am thinking 25-35 shipped for the speedometer unit
out of curiosity have you had a chance to check on the swaybars and tie bar? idk if i can afford it now...(possibly getting mint 83 cadilac deville coupe that if anyone wants to buy pm me) but still would like to know
When you plan for success you don't need a plan B - Jason Mohring
Real cars like real men have sticks... - Kevin Bond
Bought at 106,000 now has 184,000+ Miles! i still drive it like i stole it.
In need of good condition, cheap F2 in the southeast
The AutoGuide.com network consists of the largest network of enthusiast-owned enthusiast-operated automotive communities.
AutoGuide.com provides the latest car reviews, auto show coverage, new car prices, and automotive news. The AutoGuide network operates more than 100 automotive forums where our users consult peers for shopping information and advice, and share opinions as a community.
)
that coolant tube was legit, but I like to have backups! well, you have my information, let me know how much, pm me when you have some time and have some figures, then we will go from there.
, adam ecu, dual pipe mozart muffler.
.
that if anyone wants to buy pm me) but still would like to know
