OFFICIAL MX6.com Active Member Gallery

[neptune_51]

*Rules of this thread are simple:*

1.Post only 3 pictures of your car (preferably 2 outside, 1 inside)
2.List whatever mods you have done (ie:exterior, interior, engine, suspension)
3.No commentary, just show your car and thats it.
4.You can post 1 picture of another car you drive.

PLEASE ADHERE TO THESE RULES OR YOUR POSTS WILL BE DELETED


The reason for this thread are to help newcomers see what members of mx6.com are doing to their cars and hopefully useless threads like "what would my car look like with 17s" on eibach springs?"

We might even spark some interest for new ideas on these cars as it will be easier to see what is out there.

Feel free to show your ride to mx6.com, and if you have any questions, please PM me or either one of the GALLERY moderators.

*Already talked to the mods and this thread is going to be STICKY-ied*


*It has been brought to my attention that some people have had a hard time loading the pages just because there are some larger pics. If anyone has over 800x600 res images, could you please resize to a smaller #. Thanks*

[neptune_51]

neptune_51's 1993 Mazda MX6 2.5L

Exterior Mods:
jspecs w/6000k HIDs
custom [RF] jspec brackets
customized fogs w/turn signals & 3000k HIDs
LED lights (outer jspec pod)
window tint all around
black painted mirrors
cf trunk - paint matched to body
front grill
mazda6 lip (not pictured)
custom [RF] decal
m-edition painted taillights
clear front reflectors
17" super-light Kosei K1 wheels w/Falken 452 235/45/17 tires

Suspension/Tranny/Brake Mods:
Tein SS-P coilovers
929 master cylinder
b&m STS (on order)
RRE rear strut bar
K-sport SS Braided brake lines
8-piston/caliper, 13" rotor, big front brake kit
19mm AWR rear sway bar
AWR sway bar mounts and links
KF6 aluminum 'B' & 'C' pillar bars
SS MBX clutch line

Engine Mods:
C.I. CAI w/ K&N air filter
Samco rad hoses
CM II-R clutch
Fidanza flywheel
RR-Racing motor mount inserts
67mm TB (to be installed)
new p/s res. & relocation
walboro 255 fuel pump
A/C delete
test pipe w/cherry bomb resonator
Magnaflow muffler

Interior Mods:
3 pod 'A' pillar pod w/gauges
custom switch panel
momo jet steering wheel
modified foglamp switch
Alpine deck
battery moved to trunk
radar detector


Pictures

[Anphrax]

1990 Mazda MX6

460w amp
10" sony explod subwoofer
2 sony explod speakers
White off brand shift knob
Black shift boot
Whistler Pro 58 Radar Detector /w power switch
4" Fireball Muffler
Replaced passenger side CV boot

[KING6]

[megalomaniac32x]

1991 Mazda 626 dx
mods.......
tint 25%
MX6 hood
MX6 grille
PGT rear disc brakes
PGT rear swaybar
MX6 front swaybar
Mx6 turbo trans
MX6 turbo axles and spindles
Mazda 3 wheels
intrax springs
MX6 rear tie bar
mazdaspeed front strut tower bar
subaru legacy GT dual piston front calipers
MSP shift knob
LX 626 seats
LX interior swap(power everything locks, windows, mirrors)
color coded mirrors and door handles
foglights
2nd Gen RX7 steering wheel
pacesetter short shifter
custom 2.5 inch catback
JVC headunit
poineer speakers
dynomatted floor and rear decklid
Sirus radio
energy suspenion swaybar endlinks front and rear
2nd gen leather shift boot from a MX6
LX center console with armrest and storage bin

future mods, a full 89 MX6 GT swap, more pics to come

[Skanetic]

Skanetic's Rides

1994 Mazda Mx-6 LS (The new Project)
Mods
Performance/Engine:
Rebuilt KL-ZE
Cold air intake
MMI headers
Volt muffler
Dopzone springs
Exterior:
Yucky Graphics
17 inch Flik FTD Titanium finish wheels with 215/45/17
Interior:
Stock Black Leather sexyness
Blue LEDs in door, dome, dash and footwell
2 10 inch kenwood subs with a 1000w kenwood amp

[MetalMatrix]

Exterior:
Jspec Headlights w/ 5000K HID
Clear side Markers
Custom Front License Plate Holder (License Plate Holders)
Front Lip: JDM Integra AZT (JDM Integra Lip!)
Side Skirts: Prelude Mugen
Rear Lip: Camaro OEM Rear Valance (How To: Camaro RS Rear Lip Mod)
FD Rims (16" OEM RX-7)
-> G-Force KDW Tires 225/45R16
-> w/ Custom Made 9mm Hub-Centric spacers
-> Extended Wheel Studs for safety reasons.
Tail Lights (Tinted Dark Red (Painting Tail Lamps))


Performance:
Tokico Blue Struts
-> Ford Escort Front Top Mounts (Lowers the front an extra 0.75") (Ford Escort Front Top Mounts)
Apex Lowering Springs
Borla Cat-Back Exhaust (Custom Tips Coming Soon)
16mm Rear Sway Bar (*Project* - 16mm Rear Sway Bar Upgrade (from out 12mm stock one))


Engine:
Painted Intake Manifold (Black Chrome)
Painted Valve Covers (Almunimum)
Fan Shroud Cover
HEI Mod w/ external Coil (Project: HEI Module & External Coil Install)
Cold Air Intake


Interior:
Black Leather swap
13" APC Steering Wheel (Used this for reference) (Aftermarket Steeringwheel)
Mazdaspeed Pedals
Mazda 3 OEM Shifter Knob
-> Custom Shortened Shifter
Custom Black Face Gauges (Pending)
Silver Painted Dash (My Dash In Progress)
Moved Climate Control into lower DIN location (How To: Climate Control into DIN)
Autometer Gauges (Volt, Oil Pressure and Temperature)
Green LED's under seats


Stereo:
Amp Rack behind seats
Painted Amplifiers
-> Rockford Fosgate 1000.1bd
-> Rockford Fosgate 551x
Lightning Audio 1F Capacitor
Custom Encolsure for the trunk
-> Two 12" Infinity Kappa Perfect Subwoofers
XM Radio mounted inside car
Pioneer DEH-9300P Headunit








*Will post new pictures this week once I wash the car.

[Stealth]

To many mods to list ATM, will update when I have time.







And my other POS

[jeebus77]

Exterior:
18 inch Motegi DP-10 rims 215/35/18 Hankook Ventus II tires
Eibach Pro Kit Springs
Full Tint

Interior:
Swapped Black leather seats
In dash DVD (non flip up)
Cosmo Racing short throw shifter





that is all...for now

[I4MX6]

Engine/Transmission:
- Stock 2.5L V6 Internals
- Port and Polished Intake Manifold
- Custom 3” Polished Cold Air Intake with K&N Air Filter
- MSD 8.5mm Spark Plug Wires
- SSAC Full Stainless Header
- Custom 2.5” Magnaflow High-Flow Cat
- Custom 2.5” Cat-Back Exhaust with a Magnaflow Stainless Steel Performance Muffler
- ’96 LS Transmission
- Bully Stage 1 Clutch and Pressure Plate
- MX3 Lightened and Balanced 13lb Flywheel
- RR-Racing Polyurethane Front and Rear Motor Mounts and Shift Bushings
- Goodridge Stainless Braided Clutch Line


Suspension/Wheels:
- LEDA Custom True Coil-Over Suspension System
- Hypercoil Race Springs
- Ground Control Front Camber/Caster Plates
- Eibach Pro-Alignment Rear Camber Kit
- 16x8” ‘92 Spec RX7 FD Lightweight Wheels
- Kumho Ecsta SPT 225/45ZR16 Tires
- ARP Corvette Drag Wheel Studs
- H&R 15mm Hub-centric Wheel Spacers
- Ractive Polished Rear Strut Brace
- ’00 Mazda 626 16mm Rear Sway Bar
- ’00 Acura CL Moog Front Stabilizer Links
- ’96 Nissan Altima Moog Rear Stabilizer Links

Brakes:
- ‘03 Protege5 Rear Caliper Conversion
- Brembo Front and Rear Hardened Brake Rotors
- Hawk HPS Front Sport Pads
- OEM Mazda Ceramic Rear Pads
- Goodridge G-Stop Stainless Braided Brake Lines
- Motul DOT4 RBF600 Full Synthetic Racing Brake Fluid
- Custom Aluminum Front Brake Line Brackets

Exterior:
- Shaved Emblems, Trunk Keyhole, Passenger Side Handle Keyhole, and Power Antenna
- Completely Repainted OE Mazda “Brilliant Black”
- Limited Edition Genuine OEM Mazdaspeed MX6 3-piece Skirt Kit

Interior:
- Autometer Sport Comp Volt, Air/Fuel Ratio, Oil Pressure Gauges in Lotek Full Triple Pillar
- B&M Racing Short Throw Shifter
- Greddy Counter Weighted Shift Knob
- Custom Hand-Stitched Italian Leather Shift Boot
- JDM Stainless Steel MX6 Door Sills

Lighting:
- Infiniti G35 HID 4300K Retro-Fit
- Hella Optilux Extreme Yellow H3 Fog Light Bulbs

Sound:
- Alpine CDA-9831 Motorized Head Unit
- MB Quart 5.25” Component Set in Custom Door Pods
- Memphis ST100 and 500D Amplifiers
- Rockford Fosgate 1 Farad Capacitor
- Alpine Type-R 10” Subwoofer
- Fahrenheit 6.5” Widescreen LCD Monitor with Playstation2 (not included)
- StreetWires Wiring
- Viper Alarm System and Keyless with Remote Trunk Pop
- XM Satellite Radio from Terk

[turbociv920]

mods-
fidanza lw flywheel
CM stage 3
borla cat backl
test pipe
ssac headers
CAI
bremo rotors
Eibach springs
civic STS
350z shift knob(hell yeah!!)
millie miglia 17's
weight reduction



gsx- the beast yo

Cylinder Head Mods-
Fully ported and polished 2g head
valveguides are trimmed for no air flow restriction
Ferrea 1mm oversized intake valves
Ferrea 1mm oversized exhaust valves
Ferrea bronze valve guides
Brian Crower TI Springs and Retainers
3g lifters(eliminates lifter tick)
HKS 280/280 stage 3 cams
Fidanza ADJ cam gears
ARP Head studs

Engine Appearance
1g fuel rail (bigger than 2g)
1g Valve Cover (colored letters)
1g Heat shied
Intercooler pipes painted black
Heat shield painted black.

Bolt on mods-
DSMLINK engine management
2g exhaust manifold with welded on HKS Race 50mm Waste Gate
Precision 60-1 with stage 5 compressor wheel/ DSM Flanged
880 PTE Injectors
BJ'S polished Intake Manifold
Custom FMIC Setup
Burshur Fuel pressure regulator
Stainless Fuel Lines
EVO 3 Throttle Body
TB coolant Delete
2.5 Burshur housing
3" HKS Downpipe
3" HKS Cat Back
INJEN intake
GM MAF
MAFT
EBAY MBC
2 12" Slim Fans
35 psi Boost guage
Water temp gauge
Pyrometer
OIL pressure guage
N2O pressure guage

Tranny Mods-
Fidanza Flywheel
ACT 6 puck sprung hub.
STS
shifter bushing kit

Suspension-
Kyb AGX Adjustable struts
Eibach Sportline REDS
Front and Rear Camber Kits

Brakes-
SS brake lines
HAWK Cermaics up front.

wheels/ exterior
stock gst fwd wheels, sleeper mod.
OEM light weight hood
OEM style bumper-more sturdy and lighter than OEM.

WHITE ONE< 2g

[Kansas]

i'll do tha' sixes cuz no one cares about the TSeX:

1993 Mazda MX6 RS

Performance:
Prelude CAI
Various painted bits (VC, fuse box etc.)
"Performance" Plugs and wires, lol
Mandrel bent custom manifold back exhaust
Magnaflow muffler/Muffler shop tip

Suspension:
Tein lowering springs (non-coilover)

Interior/ICE:
Ebay in-dash pop out TV
X-Box
ATX trick shifter to look MTX (i was ricerific)
Kenwood deck
Kenwood mids all around
1 12" Kenwood sub
Panther37 custom reverse gauges
20% tint

Exterior Appearance:
Buddy Club kit with molded sides
17" Enkei RPM2's
Hankook something-or-other tires
Stealth built A-Spec retro/Audi RS4 HID
M-Edition tails
BMW Laguna Seca Blue paint
Custom fit Civic LED side mirrors
Clear sidemarkers





The 1G
1991 Mazda MX6 GT 5spd

No mods
except one secret one in progress

[sporter]

I may not post much, but i've been around here for years and i'm probably roaming the boards as much as the next guy. I'll do a more complete mods list later.

1994 MX-6 LS

curved neck KLZE
SSAC headers
highflow cat
custom bent dual exit exhaust
ebay cold air intake
clutchmasters Stage 1 clutch
Fidanza flywheel
B&M short throw shifter

to be continued...

[IceMan MX-6]

1993 Mx-6 LS

Exterior:
-full Shogun bodykit
-burnt orange paint
-shaved spoiler
-shaved emblems
-metallic black angel eyes
-17" hyper black wheels
soon to come: 20% tint all around

Interior:
-full tan leather conversion
-color matched dash trim and driver's side door trim

Suspension:
-complete new suspension parts (tie rods, control arms, etc.)
-Tokico HP suspension kit (Tokico Blues struts, Tokico 1" lowering springs)

Engine:
-cold air intake

Also, I don't know if I should put this with exterior or engine since it's only a muffler , but I have a Magnaflow dual oval tip muffler.

**Note:** my Tokico HP suspension kit was not installed in these pictures. I don't have any interior shots and I'd like to get an engine shot and I'll update the pictures later.

[Car-InsanE]

1996 Mazda Mx-6 M-edition, KLG4 Engine



*Engine:
-Cold Air Intake
-Custom 2.5" Exhaust Piping
-Catco High Flow Cat
-Vibrant Power1 Turbo Muffler
-Ported Mazda KLG4 V6 Manifold
-Stainless Steel Headers
-K6F Polished Fuse Box Cover
-K6F Polished Motor Mount Cover
-K6F Polished Radiaitor Supports
-Purple Painted KLG4 Valve Cover

*Suspension:
-Tokico "CUT" Lowering Springs

*Interior:
-Purple JDM Titanium Shift Knob
-Short Throw Shifter
-R-1 Racing Pedals
-Custom Tan & Black Interior

*Exterior
-NiteShaded Tail Lights
-NiteShaded Front Side Markers
-NiteShaded Rear Side Markers
-Red Painted Calipers
-Custom Antenna