yet another Z this time modded!! - Mazda MX6 Forums: MX6 Forum
Mazda MX6 Forums: MX6 Forum User Control Panel
 


» Auto Insurance
» Featured Product
» Wheel & Tire Center

Go Back   Mazda MX6 Forums: MX6 Forum > Open Forums > General Automotive > Racing Forum
Register Home Forum Active Topics Garage Garage Photo Gallery Arcade Mark Forums Read Auto EscrowAuto Loans

Mx6.com is the premier Mazda MX6 Forum on the internet. Registered Users do not see the above ads.
Reply
 
LinkBack Thread Tools
Old 5-2-08, 0:21   #1 (permalink)
  Total: 64 Power: 5
 
Join Date: Oct 2002
Location: laurel MD
Age: 41
iTrader: (0)
yet another Z this time modded!!

Another 350z under my belt!!! - ProbeTalk.com Forums

this time this one was modded. I was in the MCdonalds parking lot tonight and after coming out i see this Evo and a 350z. So i get in my car with the intent to go home and as i am leaving the parking lot i see the EVO and the Z pull up on me really quickly. The evo rev'ed on me from behind as i am awaiting the on coming traffic to pass. We get to the light in the turning lane and the light turns green and i make the turn and i punch it 1st,2nd and part of 3rd. I look back after i have gotten out of it and they both come flying past me.

As they as just riding side by side i am behind the 350. So then i hear them down shift to get ready and off they went. The EVO pulled the 350 with no problem. I am about 2 cars behind and i hit it and i pull him HARD!!! we started about 40mph and we got up to about 130!! By this time i had him by 4cars and still going.

So then i slow down and i get beside him and he asks me to blow and i tell him to just go. He hits it and gets about 1/2half car on me and pull him about 4 cars from 60 roll. Then we go from a 20 roll and i tell to go when he his ready. He hits it and almost immediatly i pull and by 100 i had him by about 6-7 cars. Then he and the Evo turn off after that.


DISCLAIMER:
Their were not other cars around during this race!!!!!

350 mods intake, header and exhaust

Last edited by Charles; 5-14-08 at 10:24..

ESPOC RACING TEAM
Charles is offline   Reply With Quote
Sponsored Links
Advertisement
 
Old 5-12-08, 22:35   #2 (permalink)

  Total: 1951 Power: 6
 
Zach's Avatar
 
Join Date: Nov 2004
Location: Auburn, WA
Age: 36
iTrader: (17)
All I see are words on teh int4rnets. Vids or it didn't happen.

88 626 4WS Turbo Noble White
97 626 LX V6 Timberline Mica
Email me for a turbo rebuild!
Zach is offline   Reply With Quote
Old 5-13-08, 6:46   #3 (permalink)
  Total: 348 Power: 5
 
Mazda4ever's Avatar
 
Join Date: May 2004
Location: Woodstock, IL, USA
Age: 25
iTrader: (0)
If gas wasnt over 4 bucks a gallon I would take a trip just to give you a race story worth posting.
Mazda4ever is offline   Reply With Quote
Old 5-13-08, 11:07   #4 (permalink)
  Total: 64 Power: 5
 
Join Date: Oct 2002
Location: laurel MD
Age: 41
iTrader: (0)
Are you talking about racing me??? As of that day i have gained another 20hp and 15 tq. So you must be talking about running me in your talon??????

ESPOC RACING TEAM
Charles is offline   Reply With Quote
Old 5-13-08, 12:25   #5 (permalink)

  Total: 1951 Power: 6
 
Zach's Avatar
 
Join Date: Nov 2004
Location: Auburn, WA
Age: 36
iTrader: (17)
You have actual dyno plots? Please post them.

88 626 4WS Turbo Noble White
97 626 LX V6 Timberline Mica
Email me for a turbo rebuild!
Zach is offline   Reply With Quote
Old 5-13-08, 14:24   #6 (permalink)
  Total: 1306 Power: 5
 
fredio54's Avatar
 
Join Date: Aug 2004
Location: Auckland, New Zealand
iTrader: (1)
Quote:
Originally Posted by Mazda4ever View Post
If gas wasnt over 4 bucks a gallon I would take a trip just to give you a race story worth posting.
Imagine for a moment that it was 6 bucks a gallon like it is in NZ?

How about 8 bucks a gallon like it is here in the UK?

How about 10 bucks a gallon like other parts of Europe?

SOFT :-p ;-)

You can't live your life on fuel pricing or in about 2 years none of us will ever leave the house... but we will, so do it now while it is cheap!

Fred.

fredio54 is offline   Reply With Quote
Old 5-13-08, 14:26   #7 (permalink)
  Total: 1306 Power: 5
 
fredio54's Avatar
 
Join Date: Aug 2004
Location: Auckland, New Zealand
iTrader: (1)
Quote:
Originally Posted by Zach View Post
You have actual dyno plots? Please post them.
Amen to that, power claims like mine should be marked as bogus until proved otherwise ;-)

Speaking of which, since yesterday, I picked up 27hp by adjusting the curve of my fake dyno graph :-) That puts me on a somewhat optimistic 412 crank hp :-) LOL, yeah right.

fredio54 is offline   Reply With Quote
Old 5-13-08, 17:58   #8 (permalink)
  Total: 64 Power: 5
 
Join Date: Oct 2002
Location: laurel MD
Age: 41
iTrader: (0)
260hp and 285tq this is with the addition of a top mount I/C vs. 240hp and 258tq with out it. You read the thread and you will see what my car has. If you want a video of me going down the track i will provide that as well. My best before the intercooler was a 13.4@100 with a 1.71 60ft and i only made 3 passes with that set up. Now when i hopefully go saturday for the impost shootout at MIR saturday i am trying for the 12's.

Here is the dyno plot thread you asked about!!

Dyno comparisons - modded vs. stock - Mazda6 / Atenza

I did not get a video for the Z races as it was a spur of the moment race. When i get to the track this saturday i hope to have someone video tape it for me. You want to bring your talon come on!! I know you are NOT talking about that 6s I am not one to call anyone out to race as i can have my AZZ handed to me anyday but i don't like when someone calls me out.

If you want to have a race and IF you beat me with one of those that are listed then i will pay for your gas here and back!!! I hvae been a long time member on this forum and probetalk and i have no time to lie about anything that i have done. There is no point...

Video coming....

YouTube - Ademan 11psi vs charles modded ms6

13.7@99 first pass with a 1.79 60ft

YouTube - Old School Nova vs MS6

13.4@100 second pass with a 1.71 60ft

i am not sure where the other 2 vids are but they were 2 13.5 passes both with sub 1.80 60fts!!! This was all done without the top mount installed. Anything else you need?

Last edited by Charles; 5-13-08 at 18:06..

ESPOC RACING TEAM
Charles is offline   Reply With Quote
Old 5-14-08, 2:11   #9 (permalink)
  Total: 1306 Power: 5
 
fredio54's Avatar
 
Join Date: Aug 2004
Location: Auckland, New Zealand
iTrader: (1)
Yeah, the car on the dyno to be YOUR car!! :-)

260hp?? and you run 13.x? good effort lol. sounds like the f2t trick of massive torque spike falling away too fast.

fredio54 is offline   Reply With Quote
Old 5-14-08, 9:24   #10 (permalink)
  Total: 64 Power: 5
 
Join Date: Oct 2002
Location: laurel MD
Age: 41
iTrader: (0)
Man what is YOUR problem? You think that it is a coincidence that MY name is CHARLES and the video that was shot by someone else posted MY name on the video and ALSO on the forum that you read about the DYNO plot that you requested has MY name on one it..... Or should i check to to see IF my name is really charles... If you go to probetalk and look at my sig that i have had for YEAR just like on here and you will see my sig states that i have a speed6!!!

There are plenty of people on here that knows and SEEN my car in action. So if that is not enough PROOF then you just keep beliving what you want. PHIL (ademan) was the car that i raced in that video. You can ask him!! Or unless you think that HE is lyeing as well.

ESPOC RACING TEAM
Charles is offline   Reply With Quote
Old 5-14-08, 9:26   #11 (permalink)
  Total: 64 Power: 5
 
Join Date: Oct 2002
Location: laurel MD
Age: 41
iTrader: (0)
Quote:
Originally Posted by fredio54 View Post
Yeah, the car on the dyno to be YOUR car!! :-)

260hp?? and you run 13.x? good effort lol. sounds like the f2t trick of massive torque spike falling away too fast.
Also i did the 13.4 with 240hp!!! Not 260.. that is what i have right now.

ESPOC RACING TEAM
Charles is offline   Reply With Quote
Old 5-14-08, 9:36   #12 (permalink)

  Total: 855 Power: 5
 
ragincanadian4's Avatar
 
Join Date: Dec 2001
Location: Tampa, FL, USA
Age: 28
iTrader: (8)
I like how you're too lazy to copy and paste the story, and have to link us to PT, apparently mx6.com isn't worth the effort. The only reason I'm mentioning this is because it's the second time now.

J to the D to the M.
ragincanadian4 is offline   Reply With Quote
Old 5-14-08, 10:26   #13 (permalink)
  Total: 64 Power: 5
 
Join Date: Oct 2002
Location: laurel MD
Age: 41
iTrader: (0)
Quote:
Originally Posted by ragincanadian4 View Post
I like how you're too lazy to copy and paste the story, and have to link us to PT, apparently mx6.com isn't worth the effort. The only reason I'm mentioning this is because it's the second time now.
It takes you just as long to click to open the racing forum as it does to click the link... But if this soothes the situation then it is fixed and i will fix the other one as well.

ESPOC RACING TEAM
Charles is offline   Reply With Quote
Old 5-14-08, 12:03   #14 (permalink)
  Total: 1306 Power: 5
 
fredio54's Avatar
 
Join Date: Aug 2004
Location: Auckland, New Zealand
iTrader: (1)
My most humble apologies Charles, the post wasn't by you and the text in the thread was huge so i assumed (wrongly) that you were giving an example :-)

Quote:
Originally Posted by Charles View Post
Also i did the 13.4 with 240hp!!! Not 260.. that is what i have right now.
Yes, like I said, with only 260hp, that is a damn good effort IMO. Well done.

No need to get your knickers in a twist ;-)

Still, having looked at those graphs, I was right about the torque curves... rising fast and falling on their face early. Free up the top end and you will be much faster again.

Fred.

fredio54 is offline   Reply With Quote
Old 5-18-08, 10:41   #15 (permalink)
  Total: 80 Power: 5
 
Join Date: Oct 2003
Location: Fl, USA
Age: 26
iTrader: (0)
Wow u must be an Uber Z Killer!!!! Grats to your ILLEGAL street racing Enjoy it. One day you will get caught and they will take your car. it will be a sad day for you but make the streets safer for the rest of us. LoL FYI I Dyno' my Z at 278.4 HP and 260lbs of torque STOCK. No Boost... 13's and high 12's STOCK.

Last edited by Jay246; 5-18-08 at 10:47..

Proud Owner Of a 2007 350z
6MT Nismo Intake,Nismo Exhaust,Avic-Z2
Brembo Brakes,
278.4 @ 6850--250lb torque--11.90 A/F
Jay246 is offline   Reply With Quote
Sponsored Links
Advertisement
 
Reply

Thread Tools

Posting Permissions
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On



Powered by vBadvanced CMPS v3.2.2

All times are GMT -5. The time now is 15:42.



Powered by vBulletin®. Copyright ©2000 - 2013, Jelsoft Enterprises Ltd.
SEO by vBSEO 3.3.2
Garage Plus vBulletin Plugins by Drive Thru Online, Inc.
© Copyright 2000-2010, MX6.com
MX6.com is in no way affiliated to Mazda Motor Corp.
All views expressed in this site are the personal opinion of the author and not necessarily the owners of MX6.com.