PMO Complaint Thread - Page 4

**HotRodMex** · 10-2-05, 20:48

Sorry to bring this post back up, but does anybody have a working e-mail address for them? My total lost to them is miniscule by the amounts some have lost, but I still want what I deserve. You don't have to post it here, but please PM it to me so I don't get lost in the shuffle.

**Messiah** · 10-3-05, 17:59

so they raised money to build a new shop for themselves? and not give us our parts?

**SAdrmmr04** · 10-16-05, 14:21

when did this whole thing about them having to make a new building thing happen? ive been out of the loop for quite a while, the last thing i remember was that [shizzle]y "were sorry" note left on their webpage.

**Dyoel182** · 11-13-05, 10:48

Hmmm, maybe a shop is the first step is me getting my strut bar that likely wont even fit. I really just want mye $125 back and I dont even care about the interest.

wkdmx3gsr · 1-4-06, 21:46

Just wondering if anyone has a good email address for them or a new Phone number? I paid for half (500.00) of my intake manifold with a money order almost a year ago haven't seen anything

really would have like it to finish my new motor build with it, really looked good... Cyborgzeroteck just doesnt look good at all. They bored my throttle body and sent it back in a timely manner turned out really good. thought i could trust Todd,GUESS I WAS WRONG

, I even got him good prices on custom Nology wires especially made for the new manifold through the shop I work for.

let me know what ya guys think front end conversion of an Acura RSX with JDM KL-ZE full motor build with direct port Nitrous.
www.cardomain.com/id/wkdmx3gsr

**Goatcrapp** · 1-4-06, 21:59

Quote:

Originally Posted by wkdmx3gsr

www.cardomain.com/id/wkdmx3gsr

linked.

So any updates from ANYONE?

i mean supposedly they were working REAL HARD to get the orders out one at a time.. btu i haven't heard from anyone who actually received parts...

methinks they duped us again.

wkdmx3gsr · 1-4-06, 22:09

thanks for the link

would really like my money from these guys but don't have a good contact for them.

**Justin** · 1-5-06, 16:33

I got an email from Misty about a month ago.She told me that I will recieve my kit or my money soon.I kinda doubt it though.-Justin

wkdmx3gsr · 1-5-06, 18:50

do ya have a good email address for her.

**Justin** · 1-5-06, 22:03

neonman_n_lilred@yahoo.comThere you go.-Justin

**KSHHUANG** · 1-6-06, 23:18

Quote:

Originally Posted by SAdrmmr04

when did this whole thing about them having to make a new building thing happen? ive been out of the loop for quite a while, the last thing i remember was that [shizzle]y "were sorry" note left on their webpage.

thats what i recall last..dam i gave em $200 bucks down payment on the rear big brake kit thats cost $900...an never got my deposit money back...all i got so far is
1-f331 front big brake kit
2-bored 60mm TB(think it was 60)
3-dam big rear strut tower bar
all i want it is my money back, im not gonna giv $700 more to get nothing... unless they drop the price of the rear brake kit =)
so are they opening a shop or gonna be on america's most wanted

**HotRodMex** · 2-16-06, 0:47

Anything new here?

prorobbedme · 4-15-06, 9:47

anyone save the pictures? link is bad and i kinda need a few of them pics? Mike i think I just might call you

**Rodeo1080** · 4-20-06, 7:03

I'm also out a rear big brake kit. I purchased the front kit and recieved it and then a few months later purchased the rear kit. I have not recieved anything. I had a few emails back and forth with Misty a while ago but nothing recent. Are they still making shipping things out? I emailed them offering to pay the shipping costs again I just want the parts. It's been a while so I think I'll email her again today.

**Dyoel182** · 4-20-06, 17:20

Good luck with that. I'm given up hope on ever hearing from them or getting my part or money from them.

10-2-05, 20:48	#46 (permalink)
HotRodMex Join Date: Nov 2002 Location: San Luis Obispo, Sunny CA! Age: 26 iTrader: (0)	Sorry to bring this post back up, but does anybody have a working e-mail address for them? My total lost to them is miniscule by the amounts some have lost, but I still want what I deserve. You don't have to post it here, but please PM it to me so I don't get lost in the shuffle.
	Apparently, I'm Mazda fo' lyfe... 1989 MX6 GT -::- 1991 RX7 Convertible

10-3-05, 17:59	#47 (permalink)
Messiah Join Date: Dec 2001 Location: Winnipeg, MB, Canada Age: 26 iTrader: (0)	so they raised money to build a new shop for themselves? and not give us our parts?
	It Is the power of christ who compells u....!!!!! Civic Mods = hydrolocked motor Finally a ze motor complete and running

11-13-05, 10:48	#49 (permalink)
Dyoel182 Join Date: Jun 2002 Location: Granbury, TX iTrader: (0)	Hmmm, maybe a shop is the first step is me getting my strut bar that likely wont even fit. I really just want mye $125 back and I dont even care about the interest.
	I'ts a piece of cake to bake a pretty cake, if the way is hazy You gotta do the cooking by the book, you know you can't be lazy

2-16-06, 0:47	#57 (permalink)
HotRodMex Join Date: Nov 2002 Location: San Luis Obispo, Sunny CA! Age: 26 iTrader: (0)	Anything new here?
	Apparently, I'm Mazda fo' lyfe... 1989 MX6 GT -::- 1991 RX7 Convertible

4-20-06, 17:20	#60 (permalink)
Dyoel182 Join Date: Jun 2002 Location: Granbury, TX iTrader: (0)	Good luck with that. I'm given up hope on ever hearing from them or getting my part or money from them.
	I'ts a piece of cake to bake a pretty cake, if the way is hazy You gotta do the cooking by the book, you know you can't be lazy

1-4-06, 21:46	#50 (permalink)
wkdmx3gsr Join Date: Jan 2006 Location: GROTON, CT, USA Age: 30 iTrader: (0)	Just wondering if anyone has a good email address for them or a new Phone number? I paid for half (500.00) of my intake manifold with a money order almost a year ago haven't seen anything really would have like it to finish my new motor build with it, really looked good... Cyborgzeroteck just doesnt look good at all. They bored my throttle body and sent it back in a timely manner turned out really good. thought i could trust Todd,GUESS I WAS WRONG , I even got him good prices on custom Nology wires especially made for the new manifold through the shop I work for. let me know what ya guys think front end conversion of an Acura RSX with JDM KL-ZE full motor build with direct port Nitrous. www.cardomain.com/id/wkdmx3gsr

1-4-06, 22:09	#52 (permalink)
wkdmx3gsr Join Date: Jan 2006 Location: GROTON, CT, USA Age: 30 iTrader: (0)	thanks for the link would really like my money from these guys but don't have a good contact for them.

1-5-06, 18:50	#54 (permalink)
wkdmx3gsr Join Date: Jan 2006 Location: GROTON, CT, USA Age: 30 iTrader: (0)	do ya have a good email address for her.

4-15-06, 9:47	#58 (permalink)
prorobbedme New Member Join Date: Dec 2005 Location: iTrader: (0)	anyone save the pictures? link is bad and i kinda need a few of them pics? Mike i think I just might call you

4-20-06, 7:03	#59 (permalink)
Rodeo1080 Join Date: Feb 2001 Location: Newmarket Ontario, Canada Age: 30 iTrader: (0)	I'm also out a rear big brake kit. I purchased the front kit and recieved it and then a few months later purchased the rear kit. I have not recieved anything. I had a few emails back and forth with Misty a while ago but nothing recent. Are they still making shipping things out? I emailed them offering to pay the shipping costs again I just want the parts. It's been a while so I think I'll email her again today.
	Rodeo1080