ITB KL Engines

**garfy1981** · 5-30-08, 15:58

Heres a few links found on good old U tube for Inlet throttle bodies on KL engines. Still 2 ways whether to do this mod or supercharge the engine.

Not too keen on turbo for fact that it seems to be the norm in bhp gain from kl engines. Nice to do something a bit one off ish.

YouTube - Gunning for 'Vettes: Mark's custom V6 Miata

YouTube - mazda 323 v6 itbs

http://mx-3.com/phpBB3/viewtopic.php?f=15&t=64698&st=0&sk=t&sd=a&start=30

**garfy1981** · 5-30-08, 20:02

on the supercharging side, the us mitsubishi eclipse supercharger seems very heavy duty and possibly more space friendly than the probe kit.

YouTube - RIPP SDS 6G72 Belt Tensioner

**neptune_51** · 5-30-08, 23:29

[shizzle]! in that second video; if the tach is accurate; took it over 10,000rpm!

**Parallex** · 5-31-08, 3:31

Garfy - do some research on the Rotrex supercharger (Uk distributor is in Silverstone), have a look around for MAX a probe that used to belong to a guy called Eugene. This is a centrifugal type S/C that is the size of an alternator, and works very well.

This is the route I am going to go, when I get moving on the rebuild of my second KLZE.

Ben.

5-30-08, 15:58	#1 (permalink)
garfy1981 Join Date: Sep 2005 Location: Kent, UK Age: 27 iTrader: (0)	ITB KL Engines Heres a few links found on good old U tube for Inlet throttle bodies on KL engines. Still 2 ways whether to do this mod or supercharge the engine. Not too keen on turbo for fact that it seems to be the norm in bhp gain from kl engines. Nice to do something a bit one off ish. YouTube - Gunning for 'Vettes: Mark's custom V6 Miata YouTube - mazda 323 v6 itbs http://mx-3.com/phpBB3/viewtopic.php?f=15&t=64698&st=0&sk=t&sd=a&start=30
	2.5 Ze straight neck, blitz intake, mazdaspeed engine mounts, fidenza flywheel, CM II Clutch, KL-36 ecu, Magnecor 8mm Leads, Battery Relocation. Speed hut dials, bilstein suspension set up. Powerspeed 2.5" stainless mandrel bent exhaust, hotshot headers, hi-flow cat. Custom 4 pot big brake conversion. Dynod 188.8whp 183.3ft-lb 99Ron Super Unleaded

5-30-08, 20:02	#2 (permalink)
garfy1981 Join Date: Sep 2005 Location: Kent, UK Age: 27 iTrader: (0)	on the supercharging side, the us mitsubishi eclipse supercharger seems very heavy duty and possibly more space friendly than the probe kit. YouTube - RIPP SDS 6G72 Belt Tensioner
	2.5 Ze straight neck, blitz intake, mazdaspeed engine mounts, fidenza flywheel, CM II Clutch, KL-36 ecu, Magnecor 8mm Leads, Battery Relocation. Speed hut dials, bilstein suspension set up. Powerspeed 2.5" stainless mandrel bent exhaust, hotshot headers, hi-flow cat. Custom 4 pot big brake conversion. Dynod 188.8whp 183.3ft-lb 99Ron Super Unleaded

5-31-08, 3:31	#4 (permalink)
Parallex Join Date: May 2005 Location: Kettering, UK Age: 25 iTrader: (0)	Garfy - do some research on the Rotrex supercharger (Uk distributor is in Silverstone), have a look around for MAX a probe that used to belong to a guy called Eugene. This is a centrifugal type S/C that is the size of an alternator, and works very well. This is the route I am going to go, when I get moving on the rebuild of my second KLZE. Ben.
	Ladies and Gents - SOON TO ARRIVE - The Fastest 6 in the midlands... Full KLZE rebuild, the proverbial works! Its all in progress - updates soon...