Breaking - 92 Burgandy Mx6 - J-spec Parts Also Available - Page 3

**Oddball** · 7-11-08, 8:00

After just reading your other post .. i was expecting your visit

Ok.. the aerial works perfect, allbeit about 2 inches shorter than it should be .. it got damaged and i had to cut about 2 inches off the base section and re-build it. What happens is when retracted, it dissapears into the shaft and does not sit flush.. nothing major or fit something to the very top to stop it going in.

Doors are complete, the drivers window has the hallmark scratches in it, you know what i mean, both motors work fine.

Paul.

**MX6 addict** · 7-11-08, 11:54

Do your matt's have the MX6 metal badge?

Mark

**Oddball** · 7-11-08, 12:05

They do mark

.. were taken from a j-spec motor .. drivers has a flattened heal area, but rest are plush. 5 in the set.. front/rear and rear throw over the tunnel.

Pics can be sorted if you wish

Paul.

**MX6 addict** · 7-12-08, 3:42

Am I right in thinking it's only the front that have the badge?
My set seem to be in perfect condition, a bit dirty but the pile is as thick as a good shag! But the passenger side is missing the badge so I think there on the way to me.

Mark

**Oddball** · 7-12-08, 5:22

I will have to check the passenger side for you Mark. I know for sure the drivers does.

Paul.

willemmx6 · 7-12-08, 17:29

Do you still have the ze cams
Want too buy them

**Oddball** · 7-12-08, 17:52

Quote:

Originally Posted by willemmx6

Do you still have the ze cams
Want too buy them

They are Provisionally Sold at the moment WillemMx6... should the sale fall through, i'll let you know.

Paul.

**Oddball** · 7-12-08, 17:54

Quote:

Originally Posted by MX6 addict

Am I right in thinking it's only the front that have the badge?
My set seem to be in perfect condition, a bit dirty but the pile is as thick as a good shag! But the passenger side is missing the badge so I think there on the way to me.

Mark

Ok.. have dug out the passenger side mat, and it does indeed have a metal badge too,, all silver, as is the drivers, and MX6 punched into it.

Paul.

**ElmerFud** · 7-13-08, 8:53

Quote:

Originally Posted by MX6 addict

.. a bit dirty but the pile is as thick as a good shag! .. .

Mark

oooer missus

I had no idea you could get a good shag! in our cars. I must try this

Mark

billyj · 7-13-08, 17:12

Hi Paul,

I'd love to take the opportunity to get more odds and ends for my car, however, I will only know what they are the first week of August. Not sure if you want to get rid of what's left of your car by then, but if not, I'm positive I'll need something :-)

Bill

**Oddball** · 7-15-08, 8:37

Bill, I cannot see me getting rid of the car within the next couple of weeks so your safe at the moment ..

Paul.

**Oddball** · 7-15-08, 8:42

starting to get a little tired of being given the run around at the mo...

Rocker covers now back on sale ..

____________________________________

Also Ben, if you do want the window motors and aerial, let me know buddy, the window motors can be a bit of a pain to get out and i need to sort out a day to get them out.

craigmx · 7-15-08, 11:43

I recieved the throttle body today paul,
cheers mate
craig

willemmx6 · 7-15-08, 12:40

Quote:

Originally Posted by Oddball

starting to get a little tired of being given the run around at the mo...

Rocker covers now back on sale ..

____________________________________

Also Ben, if you do want the window motors and aerial, let me know buddy, the window motors can be a bit of a pain to get out and i need to sort out a day to get them out.

Just give the word and you will have money for the cam wright away

**Oddball** · 7-15-08, 12:53

Quote:

Originally Posted by craigmx

I recieved the throttle body today paul,
cheers mate
craig

Pleasure Craig, unfortunately you dont get the vice too

Quote:

Originally Posted by willemmx6

Just give the word and you will have money for the cam wright away

Willem, am i to assume you would like the Rocker/cam covers in candy apple red ? please confirm, they are packed and ready to go. Let me know your country and i will get you a quote for shipping.

Paul

7-11-08, 8:00	#31 (permalink)
Oddball Join Date: Jun 2003 Location: kent, UK Age: 40 iTrader: (3)	After just reading your other post .. i was expecting your visit Ok.. the aerial works perfect, allbeit about 2 inches shorter than it should be .. it got damaged and i had to cut about 2 inches off the base section and re-build it. What happens is when retracted, it dissapears into the shaft and does not sit flush.. nothing major or fit something to the very top to stop it going in. Doors are complete, the drivers window has the hallmark scratches in it, you know what i mean, both motors work fine. Paul.
	Current Ride and new project- 93 Cavalier Turbo, running approx 260 at 12psi on phase one chips. ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ R.I.P 92 2nd gen HYBRID - ZE cams, ZE inlet manifold, Mag leads, 65mm TB, CAI, Tokico shocks springs, SS headers, SS DE-cat, SS Scorpion cat back, 17in Wolfrace Osaka alloys - pics ==>My Album

7-11-08, 12:05	#33 (permalink)
Oddball Join Date: Jun 2003 Location: kent, UK Age: 40 iTrader: (3)	They do mark .. were taken from a j-spec motor .. drivers has a flattened heal area, but rest are plush. 5 in the set.. front/rear and rear throw over the tunnel. Pics can be sorted if you wish Paul.
	Current Ride and new project- 93 Cavalier Turbo, running approx 260 at 12psi on phase one chips. ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ R.I.P 92 2nd gen HYBRID - ZE cams, ZE inlet manifold, Mag leads, 65mm TB, CAI, Tokico shocks springs, SS headers, SS DE-cat, SS Scorpion cat back, 17in Wolfrace Osaka alloys - pics ==>My Album

7-12-08, 5:22	#35 (permalink)
Oddball Join Date: Jun 2003 Location: kent, UK Age: 40 iTrader: (3)	I will have to check the passenger side for you Mark. I know for sure the drivers does. Paul.
	Current Ride and new project- 93 Cavalier Turbo, running approx 260 at 12psi on phase one chips. ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ R.I.P 92 2nd gen HYBRID - ZE cams, ZE inlet manifold, Mag leads, 65mm TB, CAI, Tokico shocks springs, SS headers, SS DE-cat, SS Scorpion cat back, 17in Wolfrace Osaka alloys - pics ==>My Album

7-12-08, 17:29	#36 (permalink)
willemmx6 Join Date: Dec 2004 Location: , holland Age: 47 iTrader: (5)	Do you still have the ze cams Want too buy them
	http://www.cardomain.com/ride/2512461

7-15-08, 8:37	#41 (permalink)
Oddball Join Date: Jun 2003 Location: kent, UK Age: 40 iTrader: (3)	Bill, I cannot see me getting rid of the car within the next couple of weeks so your safe at the moment .. Paul.
	Current Ride and new project- 93 Cavalier Turbo, running approx 260 at 12psi on phase one chips. ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ R.I.P 92 2nd gen HYBRID - ZE cams, ZE inlet manifold, Mag leads, 65mm TB, CAI, Tokico shocks springs, SS headers, SS DE-cat, SS Scorpion cat back, 17in Wolfrace Osaka alloys - pics ==>My Album

7-11-08, 11:54	#32 (permalink)
MX6 addict Join Date: Sep 2005 Location: Manchester, UK iTrader: (1)	Do your matt's have the MX6 metal badge? Mark

7-12-08, 3:42	#34 (permalink)
MX6 addict Join Date: Sep 2005 Location: Manchester, UK iTrader: (1)	Am I right in thinking it's only the front that have the badge? My set seem to be in perfect condition, a bit dirty but the pile is as thick as a good shag! But the passenger side is missing the badge so I think there on the way to me. Mark

7-13-08, 17:12	#40 (permalink)
billyj Join Date: Oct 2006 Location: Oxford, UK iTrader: (1)	Hi Paul, I'd love to take the opportunity to get more odds and ends for my car, however, I will only know what they are the first week of August. Not sure if you want to get rid of what's left of your car by then, but if not, I'm positive I'll need something :-) Bill

7-15-08, 8:42	#42 (permalink)
Oddball Join Date: Jun 2003 Location: kent, UK Age: 40 iTrader: (3)	starting to get a little tired of being given the run around at the mo... Rocker covers now back on sale .. ____________________________________ Also Ben, if you do want the window motors and aerial, let me know buddy, the window motors can be a bit of a pain to get out and i need to sort out a day to get them out.
	Current Ride and new project- 93 Cavalier Turbo, running approx 260 at 12psi on phase one chips. ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ R.I.P 92 2nd gen HYBRID - ZE cams, ZE inlet manifold, Mag leads, 65mm TB, CAI, Tokico shocks springs, SS headers, SS DE-cat, SS Scorpion cat back, 17in Wolfrace Osaka alloys - pics ==>My Album

7-15-08, 11:43	#43 (permalink)
craigmx Join Date: Mar 2008 Location: , UK Age: 27 iTrader: (1)	I recieved the throttle body today paul, cheers mate craig
	Klze IM & cams,eprom chipped ecu,millenia 280cc injectors,custom twin filter cai,10.2mm racaing leads with ngk iridium plugs,ss headers,decat pipe,powerflow catback exhaust,drilled & grooved discs with greenstuff pads. http://www.cardomain.com/ride/2909672