Breaking - 92 Burgandy Mx6 - J-spec Parts Also Available - Page 5

**Oddball** · 7-22-08, 13:48

yes i do Si and PM replied

Paul.

mx6 jay · 7-22-08, 16:55

hi mate, whereabouts are you in kent?

just wondering as i may be interested in some more bits and im working in kent from next week for a little while?

cheers jamie

**Oddball** · 7-22-08, 17:02

Hi Jamie .. Faversham matey .. about 3 mins from jct 7 m2. where you working ? i'll tell you how far.

Paul.

mx6 jay · 7-22-08, 17:07

in rochester, got a big ish job on for two weeks.

is that far?

**Oddball** · 7-22-08, 17:10

rochester is jct 4 of the M2 .. about 15 mins further down is me ..

Paul.

mx6 jay · 7-22-08, 17:18

cool not far. will work out what bits i culd do with and sort a list out.

is you de block and heads in good condition as im quite interested to do a fully rebuilt engine as a spare. plus learn more about it.

also i dont suppose you had an aftermarket steering wheel in there or some nice gauges?

**Oddball** · 7-22-08, 17:30

Well your nearly totally in luck ... the heads are off, the block is still in the bay, although i do have another with ZE pistons in it, the s/wheel has gone already ( momo race) .. and the guages i'm not totally sure if i'm ready to let them go or put in my cav tub..

I dont own an hoist or anything though Jamie, and a good van would be required to move these motors, they weight a bloody ton ! ..

Paul.

mx6 jay · 7-22-08, 18:04

cool, guess its best if i pop down and take a look. did the boss kit go with the wheel?

my works van is a good size so weight and the fact i dont own it are a bonus!! lol

**Oddball** · 7-24-08, 7:28

Jamie .. the Boss is gone too i'm afraid. Feel free to get in touch when down here to arrange a look around.

_______________________________________________________

Original post updated - HAPPY TO TAKE OFFERS ON ALL PARTS, FEEL FREE TO GET IN TOUCH

Paul.

**Oddball** · 7-28-08, 11:18

Craig... Alternator collected this morning.. should be with you soon

Ben.. have you decided what your doing yet buddy ?

Some of the prices have been dropped... please, dont be affraid to drop me an offer, .. i dont bite too hard

Paul.

nasher · 8-2-08, 8:44

Paul

Got the gearbox this morning, TIP TOP! Thanks mate.

MX6JAY, Thanks for bringing it back for me.

The spirit of the MX6 owners is great. This guy saved me a 200 trip, with a dodgy gearbox.

Karma to you both.

**max626** · 8-4-08, 16:07

This is a Jspec mx6 correct? How much for the front bumper shipped to the USA? if you can find out for me im very interested and if u have any pics of it my email is Maximus0601@aol.com

**Oddball** · 8-4-08, 16:46

Sorry this is a uk spec 6. and my front bumper does have some damage.

Paul.

**max626** · 8-5-08, 1:08

Hmm could i get some pics i might be able to with wit it...

**Oddball** · 8-23-08, 18:58

ok.. LAST CALL ...

this is the last week !!! i shall be arranging for her to be taken away end of the week... i shall not be keeping anything large nor anything that you ask to me keep without payment in advance.. I may keep a few small items.. depends on my mood at the time and if i can be bothered to keep triping over it for the next few months in the garage

Paul

7-22-08, 13:48	#61 (permalink)
Oddball Join Date: Jun 2003 Location: kent, UK Age: 40 iTrader: (3)	yes i do Si and PM replied Paul.
	Current Ride and new project- 93 Cavalier Turbo, running approx 260 at 12psi on phase one chips. ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ R.I.P 92 2nd gen HYBRID - ZE cams, ZE inlet manifold, Mag leads, 65mm TB, CAI, Tokico shocks springs, SS headers, SS DE-cat, SS Scorpion cat back, 17in Wolfrace Osaka alloys - pics ==>My Album

7-22-08, 17:02	#63 (permalink)
Oddball Join Date: Jun 2003 Location: kent, UK Age: 40 iTrader: (3)	Hi Jamie .. Faversham matey .. about 3 mins from jct 7 m2. where you working ? i'll tell you how far. Paul.
	Current Ride and new project- 93 Cavalier Turbo, running approx 260 at 12psi on phase one chips. ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ R.I.P 92 2nd gen HYBRID - ZE cams, ZE inlet manifold, Mag leads, 65mm TB, CAI, Tokico shocks springs, SS headers, SS DE-cat, SS Scorpion cat back, 17in Wolfrace Osaka alloys - pics ==>My Album

7-22-08, 17:10	#65 (permalink)
Oddball Join Date: Jun 2003 Location: kent, UK Age: 40 iTrader: (3)	rochester is jct 4 of the M2 .. about 15 mins further down is me .. Paul.
	Current Ride and new project- 93 Cavalier Turbo, running approx 260 at 12psi on phase one chips. ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ R.I.P 92 2nd gen HYBRID - ZE cams, ZE inlet manifold, Mag leads, 65mm TB, CAI, Tokico shocks springs, SS headers, SS DE-cat, SS Scorpion cat back, 17in Wolfrace Osaka alloys - pics ==>My Album

7-22-08, 17:30	#67 (permalink)
Oddball Join Date: Jun 2003 Location: kent, UK Age: 40 iTrader: (3)	Well your nearly totally in luck ... the heads are off, the block is still in the bay, although i do have another with ZE pistons in it, the s/wheel has gone already ( momo race) .. and the guages i'm not totally sure if i'm ready to let them go or put in my cav tub.. I dont own an hoist or anything though Jamie, and a good van would be required to move these motors, they weight a bloody ton ! .. Paul.
	Current Ride and new project- 93 Cavalier Turbo, running approx 260 at 12psi on phase one chips. ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ R.I.P 92 2nd gen HYBRID - ZE cams, ZE inlet manifold, Mag leads, 65mm TB, CAI, Tokico shocks springs, SS headers, SS DE-cat, SS Scorpion cat back, 17in Wolfrace Osaka alloys - pics ==>My Album

7-24-08, 7:28	#69 (permalink)
Oddball Join Date: Jun 2003 Location: kent, UK Age: 40 iTrader: (3)	Jamie .. the Boss is gone too i'm afraid. Feel free to get in touch when down here to arrange a look around. _______________________________________________________ Original post updated - HAPPY TO TAKE OFFERS ON ALL PARTS, FEEL FREE TO GET IN TOUCH Paul.
	Current Ride and new project- 93 Cavalier Turbo, running approx 260 at 12psi on phase one chips. ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ R.I.P 92 2nd gen HYBRID - ZE cams, ZE inlet manifold, Mag leads, 65mm TB, CAI, Tokico shocks springs, SS headers, SS DE-cat, SS Scorpion cat back, 17in Wolfrace Osaka alloys - pics ==>My Album

7-22-08, 16:55	#62 (permalink)
mx6 jay Join Date: May 2008 Location: swindon, UK Age: 29 iTrader: (0)	hi mate, whereabouts are you in kent? just wondering as i may be interested in some more bits and im working in kent from next week for a little while? cheers jamie

7-22-08, 17:07	#64 (permalink)
mx6 jay Join Date: May 2008 Location: swindon, UK Age: 29 iTrader: (0)	in rochester, got a big ish job on for two weeks. is that far?

7-22-08, 17:18	#66 (permalink)
mx6 jay Join Date: May 2008 Location: swindon, UK Age: 29 iTrader: (0)	cool not far. will work out what bits i culd do with and sort a list out. is you de block and heads in good condition as im quite interested to do a fully rebuilt engine as a spare. plus learn more about it. also i dont suppose you had an aftermarket steering wheel in there or some nice gauges?

7-22-08, 18:04	#68 (permalink)
mx6 jay Join Date: May 2008 Location: swindon, UK Age: 29 iTrader: (0)	cool, guess its best if i pop down and take a look. did the boss kit go with the wheel? my works van is a good size so weight and the fact i dont own it are a bonus!! lol

7-28-08, 11:18	#70 (permalink)
Oddball Join Date: Jun 2003 Location: kent, UK Age: 40 iTrader: (3)	Craig... Alternator collected this morning.. should be with you soon Ben.. have you decided what your doing yet buddy ? Some of the prices have been dropped... please, dont be affraid to drop me an offer, .. i dont bite too hard Paul.
	Current Ride and new project- 93 Cavalier Turbo, running approx 260 at 12psi on phase one chips. ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ R.I.P 92 2nd gen HYBRID - ZE cams, ZE inlet manifold, Mag leads, 65mm TB, CAI, Tokico shocks springs, SS headers, SS DE-cat, SS Scorpion cat back, 17in Wolfrace Osaka alloys - pics ==>My Album

8-2-08, 8:44	#71 (permalink)
nasher Join Date: Dec 2007 Location: Gloucester, UK iTrader: (0)	Paul Got the gearbox this morning, TIP TOP! Thanks mate. MX6JAY, Thanks for bringing it back for me. The spirit of the MX6 owners is great. This guy saved me a 200 trip, with a dodgy gearbox. Karma to you both.
	Just a Nice car

8-4-08, 16:07	#72 (permalink)
max626 Join Date: Nov 2003 Location: Queens, New York, NY, USA Age: 19 iTrader: (2)	This is a Jspec mx6 correct? How much for the front bumper shipped to the USA? if you can find out for me im very interested and if u have any pics of it my email is Maximus0601@aol.com
	Iam just a regular everyday normal guy. TT Project.

8-4-08, 16:46	#73 (permalink)
Oddball Join Date: Jun 2003 Location: kent, UK Age: 40 iTrader: (3)	Sorry this is a uk spec 6. and my front bumper does have some damage. Paul.
	Current Ride and new project- 93 Cavalier Turbo, running approx 260 at 12psi on phase one chips. ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ R.I.P 92 2nd gen HYBRID - ZE cams, ZE inlet manifold, Mag leads, 65mm TB, CAI, Tokico shocks springs, SS headers, SS DE-cat, SS Scorpion cat back, 17in Wolfrace Osaka alloys - pics ==>My Album

8-5-08, 1:08	#74 (permalink)
max626 Join Date: Nov 2003 Location: Queens, New York, NY, USA Age: 19 iTrader: (2)	Hmm could i get some pics i might be able to with wit it...
	Iam just a regular everyday normal guy. TT Project.

8-23-08, 18:58	#75 (permalink)
Oddball Join Date: Jun 2003 Location: kent, UK Age: 40 iTrader: (3)	ok.. LAST CALL ... this is the last week !!! i shall be arranging for her to be taken away end of the week... i shall not be keeping anything large nor anything that you ask to me keep without payment in advance.. I may keep a few small items.. depends on my mood at the time and if i can be bothered to keep triping over it for the next few months in the garage Paul
	Current Ride and new project- 93 Cavalier Turbo, running approx 260 at 12psi on phase one chips. ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ R.I.P 92 2nd gen HYBRID - ZE cams, ZE inlet manifold, Mag leads, 65mm TB, CAI, Tokico shocks springs, SS headers, SS DE-cat, SS Scorpion cat back, 17in Wolfrace Osaka alloys - pics ==>My Album