Grey Leather + Speedlines

**windy_mx6** · 4-29-09, 15:45

As in my breaking thread, i'm selling these parts to recover the cost of the donor car I bought to restore mine.

I have a set of 5 16" Speedline alloys and virtually new Pirelli P6000's on them

Plus a full Grey Leather interior. There is wear to the piping on the drivers bolster + a hole in the side of the bolster + wear to the passenger side piping. Its in above average condition and could easily be professionally repaired for little money. All doors cards and switches are included.

I can help fit the interior so you dont have to worry about collecting in a van etc, just leave your old interior here.

The pics show the interior as I got it, after the car had stood for a year so it should look better after a clean up.

Looking for £100 for the wheels and £100 for the interior please.

I also have a working electric aerial, mats, new backbox + centre section, drilled and grooved disks + greenstiff pads, soft touch heater control, throttle body and inlet manifold, Noble Green mirrors, all interior plastics and switches, fogs with surrounds.

The interior is in my lock-up in Melton Mowbray but the car is being stripped at my mates in Grantham but collection can be sorted if you need anything.

Pm's welcome.

**windy_mx6** · 4-29-09, 18:05

themexican is popping up tomorrow to pick up the rear calipers ready for his mot so I hope the weather stays good.

Any one need anything else, please shout before the car is gone tomorrow.

Cheers, windy

Paula · 4-29-09, 18:56

Such a shame that Mazda used those crappy wheel inserts on the Speedline 16" wheels compared to the nice one's on earlier 15" wheels.

I haven't seen one yet that has the word Mazda still legible.

RJSzynal · 4-30-09, 4:52

Quote:

Originally Posted by Paula

Such a shame that Mazda used those crappy wheel inserts on the Speedline 16" wheels compared to the nice one's on earlier 15" wheels.

I haven't seen one yet that has the word Mazda still legible.

My centres are in great condition, just not the outer edges, lol.

Now you have seen one where the word Mazda is still legible.

Robert

Paula · 4-30-09, 14:45

Hi Robert,

This is a first for me ....

Paula

**windy_mx6** · 4-30-09, 17:05

Wheels, interior and aerial all provisionally sold to Gerry, a new member who will be joining soon and will be a welcome addition to the club.

He has a 1993 Pacific blue that he wants to restore to excellent standard condition so watch out Paula, you got some competition!

I told him to have a look at yours to see how good a 6 can be hun!

Paula · 4-30-09, 18:10

Hiya Paul,

Great news to have a new member here .....

Thank you for the compliments on BaBaKa.

I had better keep polishing then .......

Nite

Paula

Quote:

Originally Posted by windy_mx6

Wheels, interior and aerial all provisionally sold to Gerry, a new member who will be joining soon and will be a welcome addition to the club.

He has a 1993 Pacific blue that he wants to restore to excellent standard condition so watch out Paula, you got some competition!

I told him to have a look at yours to see how good a 6 can be hun!

**nasher** · 4-30-09, 18:15

Windy,
What are those discs on the front? Are they good?

**windy_mx6** · 5-1-09, 2:37

They are nearly new EBC drilled and grooved disks + I have a set of 4 EBC green stuff pads that are like new.

I can take pics if you want mate, i'm not going to bother putting them on mine coz i've just changed all my brakes.

**nasher** · 5-1-09, 14:54

Quote:

Originally Posted by windy_mx6

They are nearly new EBC drilled and grooved disks + I have a set of 4 EBC green stuff pads that are like new.

I can take pics if you want mate, i'm not going to bother putting them on mine coz i've just changed all my brakes.

PM sent mate