How's this for forced induction? - Page 3

**Boosting6** · 10-4-05, 22:42

Whoa people!!
Ok, here is what we refer to as hi flowing the standard turbo:
"The compressor wheel is now 42mm in diameter. The standard compressor wheel for a TX5 or MX6/626 2.2L engine is 29mm! "
Hope that clears a few things up...

Also, here are some examples of power increases as dyno'd by a local OZ member who developed our local chip, similar to zombies chip:
How much power and torque does this (chip) upgrade give me over stock

Depending on which level your car is at to start with.
Stock + 15psi =>130kW and 340Nm
Exhaust, hi-flow +15psi => 180kW and 440Nm

It is specifically to suit:
2.5"-3" exhaust,
180-240cfm turbo (stock, hiflow and some improvements on T28 )
15psi. (lower psi on T28 )

**knightwing1508** · 10-4-05, 23:18

Damnit, give that man a round of applause. Thanks for ending and settling another endless and worthless battle. Let's give this guy some karma.

**SixSick6** · 10-4-05, 23:23

Quote:

Originally Posted by knightwing1508

Damnit, give that man a round of applause. Thanks for ending and settling another endless and worthless battle. Let's give this guy some karma.

BS. That is completely incorrect. The diameter of the vj11 compressor is 52.50mm and the outer fin is 36mm:

http://www.mx6.com/forums/showthread.php?t=124920 (IHI RHB5 VJ11/ IHI RHB5 VJ5 Comparison..Just for you Kirk!)

Also the vj11 is capable of over 300 cfm but is far beyond it's limit at that point:

http://www.mx6.com/forums/showthread.php?t=107278 (Exhaust Flow Calculator)

Again, proving how "high flowing" isn't giving you guys anything you think it is. Christ, you don't even know the dimensions of the compressor wheel in the first place

**Boosting6** · 10-5-05, 3:16

I got these compressor sizings off this site (not the oz section) a while ago and we all know the internet is always true...but the power increases with the chip, hi flow etc have been documented and proven many a time.

Ok 666, seeing as u measure everything yourself, what is the largest diameter comp. wheel that can be installed in the stock housing??? That is essentially what we refer to as being a hi flow, figures posted may be wrong, but im sure u get the concept! Do u agree the power increases quoted are attainable??
Out of interest, how much bigger are the T birds u guys use???
I find im not as grumpy when i get laid...

Oh, and i think the quikest time on a "hi flow", with basic supporting mods down here is a 13.5.

**SixSick6** · 10-5-05, 5:02

Quote:

Originally Posted by Boosting6

I got these compressor sizings off this site (not the oz section) a while ago and we all know the internet is always true...but the power increases with the chip, hi flow etc have been documented and proven many a time.

Link?

Quote:

Originally Posted by Boosting6

Ok 666, seeing as u measure everything yourself, what is the largest diameter comp. wheel that can be installed in the stock housing???

I don't know, you tell me, you're the ones "high flowing" the stock turbo.

Quote:

Originally Posted by Boosting6

That is essentially what we refer to as being a hi flow, figures posted may be wrong, but im sure u get the concept!

I understand the concept perfectly. I was asking for numbers which none of you have. You guys only know the term "high flowed" and leave it at that.

Quote:

Originally Posted by Boosting6

Do u agree the power increases quoted are attainable??

Show me a link where someone has dynoed 240HP or 180kW with a "high flowed" turbo.

Quote:

Out of interest, how much bigger are the T birds u guys use???

39mm and 52.50mm. The overall diameter is the same as stock, otherwise you'd have to modify/use another center section.

Quote:

Originally Posted by HighFlowed

Oh, and i think the quikest time on a "hi flow", with basic supporting mods down here is a 13.5.

You think or you know? Link? Trim of the turbine and compressor wheel?

**crusty** · 11-2-05, 4:46

Have I called you a [cork soaker] lately?

**crusty** · 11-2-05, 4:56

Panther, Why lock a thread and then post a link of yet another thread where this [cork soaker] is carrying on with "how dumb us Australians are". Are you impartially moderating this site or not?
Do you want me to start posting about "all you dumb Americans" and see how long I last before you let Damian [cork soaker] have the last post and then close it like normal?

Serioiusly, do you think your actions aren't crystal clear transparant?

Last time I checked posting rules, you weren't allowed to bring up closed threads. [cork soaker] has done this on multiple occassions now. Each time about him not being able to accept different countries use different terms. I don't know how many times we have to shout,"it's a genric term, there are NO specifations". Like "lowered" means different heights for different people. "Ported" mean different amounts of flow depending on the job. You guys must be pretending to be this stupid, 'cause if it were true you'd need someone next to you telling you when to breath.

Panther, you even link a closed thread to another that [cork soaker] is carrying on with the same [shizzle]. What's your motive? The rules also mention racial offensive content. Personally I find calling "Australians" dumb & ignorant offensive. You allow that? Of course you do.
So I ask you again, are you impartially moderating this site or not?

**crusty** · 11-2-05, 5:09

Quote: Originally Posted by SixSick6
So I take it you won't be divulging the trim of said compressor wheel, rather simply stating "high flowed" like the rest of the Aussies?:

http://www.mx6.com/forums/showthread.php?t=141502 (How's this for forced induction?)

Quote:

Originally Posted by panther

Just let it go. Sorta like the drivers around here who cut everyone off and are completely retarded. You can't change 'em so let it go.

So Aussies are retarded now? Do you think we need edumacationing by smart people like [cork soaker]?

Are you sure you're a mod?

**SD6** · 11-2-05, 5:37

Wah Wah, Boo-Hoo

**crusty** · 11-2-05, 5:45

What are you, 5?
It's true, you can hide smart, but dumb always shines through.

**moebius** · 11-2-05, 5:48

Well.... my [cork soaker] has been high flowed ... oh yeah...

Of course, on bad days, my favorite cock sucker has high flow, but that's another story....

**91turbo666** · 11-2-05, 5:49

crusty raises some fair points. but perhaps he is wasting his breath on this topic.

half the the arguments are like:

Quote:

Originally Posted by SD6

Wah Wah, Boo-Hoo

the other half involve huge posts on worthless crap noone even reads.

**crusty** · 11-2-05, 5:49

Quote:

Originally Posted by moebius

Of course, on bad days, my favorite cock sucker has high flow, but that's another story....

LOL, now that is funny.

**SD6** · 11-2-05, 6:00

Quote:

Originally Posted by crusty

What are you, 5?
It's true, you can hide smart, but dumb always shines through.

I'm rubber, you're glue, etc, etc.

Seriously, people who whine like you should be gathered up and shot.

Panther made a remark towards the aussies who spoke of "high flowed" turbos and knew nothing about the process which makes them so.

YOU took things out of context and got your panties in a bunch because you wanted to be CAPTAIN AUSTRALIA CRUSADER FOR AUSSIE RIGHTS or some such crap and tried to turn this into a "OMG PANTHER IS A RACIST MODERATOR HE HATES AUSTRALIA AND KANGAROOS WAH WAH" deal.

Gathered up and shot, all of you.

**crusty** · 11-2-05, 6:02

Shot, now that does sound like another real mature interweb threat.

I hope you're the one with the gun. You sound stupid enough that you may just shoot yourself.

10-4-05, 22:42	#31 (permalink)
Boosting6 Join Date: Sep 2002 Location: Sydney, Australia iTrader: (0)	Whoa people!! Ok, here is what we refer to as hi flowing the standard turbo: "The compressor wheel is now 42mm in diameter. The standard compressor wheel for a TX5 or MX6/626 2.2L engine is 29mm! " Hope that clears a few things up... Also, here are some examples of power increases as dyno'd by a local OZ member who developed our local chip, similar to zombies chip: How much power and torque does this (chip) upgrade give me over stock Depending on which level your car is at to start with. Stock + 15psi =>130kW and 340Nm Exhaust, hi-flow +15psi => 180kW and 440Nm It is specifically to suit: 2.5"-3" exhaust, 180-240cfm turbo (stock, hiflow and some improvements on T28 ) 15psi. (lower psi on T28 )
	"Lack of pu ssy makes you brave man!!" "Cocaine is a hell of a drug!!" "What the fu*k is GOONY GU GU??" "Mm mm mmm, that IS a tasty burger !! "

10-4-05, 23:18	#32 (permalink)
knightwing1508 Join Date: Apr 2005 Location: , CT, USA Age: 26 iTrader: (0)	Damnit, give that man a round of applause. Thanks for ending and settling another endless and worthless battle. Let's give this guy some karma.
	1998.5 Ford Contour SVT K&N Filter, 3 Inch Catback Exhaust, Custom Vinyl Eyelids 1989 Ford Probe GT 2.5 Inch Custom Exhaust & Downpipe, High Flow Cat, MBC, Zombie Chip finally here!!!!!!!!, T-Bird Hybrid, K&N Filter, NGK Plugs, Carquest Wires, Exedy Stage 1 Clutch

10-5-05, 3:16	#34 (permalink)
Boosting6 Join Date: Sep 2002 Location: Sydney, Australia iTrader: (0)	I got these compressor sizings off this site (not the oz section) a while ago and we all know the internet is always true...but the power increases with the chip, hi flow etc have been documented and proven many a time. Ok 666, seeing as u measure everything yourself, what is the largest diameter comp. wheel that can be installed in the stock housing??? That is essentially what we refer to as being a hi flow, figures posted may be wrong, but im sure u get the concept! Do u agree the power increases quoted are attainable?? Out of interest, how much bigger are the T birds u guys use??? I find im not as grumpy when i get laid... Oh, and i think the quikest time on a "hi flow", with basic supporting mods down here is a 13.5. Last edited by Boosting6 : 10-5-05 at 3:21.
	"Lack of pu ssy makes you brave man!!" "Cocaine is a hell of a drug!!" "What the fu*k is GOONY GU GU??" "Mm mm mmm, that IS a tasty burger !! "

11-2-05, 4:46	#36 (permalink)
crusty Join Date: Mar 2003 Location: Boostville, Queensland, Oz, population....Me. Age: 38 iTrader: (0)	Have I called you a [cork soaker] lately?
	When they outlaw freedom, only outlaws are free

11-2-05, 4:56	#37 (permalink)
crusty Join Date: Mar 2003 Location: Boostville, Queensland, Oz, population....Me. Age: 38 iTrader: (0)	Panther, Why lock a thread and then post a link of yet another thread where this [cork soaker] is carrying on with "how dumb us Australians are". Are you impartially moderating this site or not? Do you want me to start posting about "all you dumb Americans" and see how long I last before you let Damian [cork soaker] have the last post and then close it like normal? Serioiusly, do you think your actions aren't crystal clear transparant? Last time I checked posting rules, you weren't allowed to bring up closed threads. [cork soaker] has done this on multiple occassions now. Each time about him not being able to accept different countries use different terms. I don't know how many times we have to shout,"it's a genric term, there are NO specifations". Like "lowered" means different heights for different people. "Ported" mean different amounts of flow depending on the job. You guys must be pretending to be this stupid, 'cause if it were true you'd need someone next to you telling you when to breath. Panther, you even link a closed thread to another that [cork soaker] is carrying on with the same [shizzle]. What's your motive? The rules also mention racial offensive content. Personally I find calling "Australians" dumb & ignorant offensive. You allow that? Of course you do. So I ask you again, are you impartially moderating this site or not? Last edited by crusty : 11-2-05 at 5:17.
	When they outlaw freedom, only outlaws are free

11-2-05, 5:37	#39 (permalink)
SD6 Custom User Title Join Date: Jul 2002 Location: San Diego, CA, USA Age: 25 iTrader: (1)	Wah Wah, Boo-Hoo
	98 GS-T Spyder

11-2-05, 5:45	#40 (permalink)
crusty Join Date: Mar 2003 Location: Boostville, Queensland, Oz, population....Me. Age: 38 iTrader: (0)	What are you, 5? It's true, you can hide smart, but dumb always shines through.
	When they outlaw freedom, only outlaws are free

11-2-05, 5:48	#41 (permalink)
moebius Join Date: Apr 2002 Location: Vancouver, WA, USA Age: 30 iTrader: (2)	Well.... my [cork soaker] has been high flowed ... oh yeah... Of course, on bad days, my favorite cock sucker has high flow, but that's another story....
	1990 626 GT 5 Door-- which "goes like a scalded weasel" says my father-in-law... on 1/2 throttle... Zoom Zoom...

11-2-05, 6:02	#45 (permalink)
crusty Join Date: Mar 2003 Location: Boostville, Queensland, Oz, population....Me. Age: 38 iTrader: (0)	Shot, now that does sound like another real mature interweb threat. I hope you're the one with the gun. You sound stupid enough that you may just shoot yourself.
	When they outlaw freedom, only outlaws are free