Can Sum1 Help Me I Got Sum ????? - Page 2

**SXE MX6** · 12-5-06, 10:16

He wants to blow his engine up.........

SO.......AS I HAVE ALREADY SAID, easiest thing to do is,

#1, get a ecu chip to eliminate boost cut
#2 remove your wastegate line completely, and boost away!

You'll have the most boost your ever gonna get, and yes you will blow up your engine!!

**SixSick6** · 12-5-06, 13:41

Quote:

Originally Posted by stock88mx6gt

ok so i [fizzle]ed up i dont wanna blow up the turbo my motor has 210k on it and i wanna push the most boost i can till the motor pops i am gettin a new engine this winter so can someone help me on how to up my boost there is that better u f**ks

I realize that you're a kid, but stop being an immature little kid.

**AMD IS THE BEST** · 12-5-06, 13:53

Drain the oil and fill it up with H20 (Brita), should run like a champ. Be sure to change the H20 filter though.

**Karaha** · 12-5-06, 14:12

ECU and nitromethane/methanol instead of gasoline. Have fun and wear fire gear.

sokarul · 12-5-06, 15:02

You dont need a T. Just put the boost controler in the place of the stock boost solenoid. The line should go from the turbo compressor housing to the boost controler, then to the wastegate.

**Zach** · 12-5-06, 15:26

Quote:

Originally Posted by stock88mx6gt

Ok So I Got A Manual Boost Controller Off Ebay Just 2 Start Toying Wit My Car And I Hooked It Up 2 The Wastegate And A T Off A Intake Manifold Vacuem Like Y Wont It Work Sum 1 Plz Help Me I Wanna C The Power I Can Get Outta The Stock Turbo B4 I Blow It Up

how about you leave it stock, mmmmkay

and yes, you can thank me for your ruby

**SXE MX6** · 12-5-06, 16:26

LMFAO @ "RUBY".........

and why sokarul, would he even bother hooking up his supaaaaaa duuuuupaaaaaa BOOOOOOOOOOST controoolaa, if in fact, he want to blow it up, which is kinda making my eye twich........

buddy, you wasted your $$$ on a controller, when what you should have bought is a speed racer ecu chip from ebay!

**MazdaMan069** · 12-5-06, 19:16

Just start it up and hold it to the floor. Make sure the engine is ice cold first. Then when you get the new engine, make it fast.

**91turbo666** · 12-5-06, 20:28

even if you are swapping the engine dont be so fast in trying to push as much power out of it for [shizzle]s and giggles otherwise you might bust something else in the process. not to mention running into a kerb or something. if you were scrapping the whole car i guess it wouldnt matter really, but since you want to save the car...

**tyler886** · 12-5-06, 21:30

Quote:

Originally Posted by stock88mx6gt

ok yeah i did go 2 school but the way i type is faster and it still get the point across right u know what i am sayin so there 4 u can all eat a dick and there is like 2 nice ppl out there tryin 2 help and I AM GETTIN A NEW MOTOR u ppl must not read right cuz i am going 2 boost it at 12psi cuz i have a boost gauge i cone filter and a exhaust at the end of the week so ya i just wanna make it a lil faster but most of u guys like 2 b dicks so thabnx 2 the few ppl who have helped me

I lost breathe halfway, anyone that can read it through want to make Cliff Notes?

-Tyler

Jon · 12-5-06, 21:34

I lik 2 typ lik im txting!

**SixSick6** · 12-5-06, 21:51

Quote:

Originally Posted by stock88mx6gt

4 u can all eat a dick

...

....

Jon · 12-5-06, 21:57

Yes, I did Google Image Search it...and no, I would not reccomend doing that.

**SinCity** · 12-6-06, 2:18

Quote:

Originally Posted by stock88mx6gt

ok yeah i did go 2 school but the way i type is faster and it still get the point across right u know what i am sayin so there 4 u can all eat a dick and there is like 2 nice ppl out there tryin 2 help and I AM GETTIN A NEW MOTOR u ppl must not read right cuz i am going 2 boost it at 12psi cuz i have a boost gauge i cone filter and a exhaust at the end of the week so ya i just wanna make it a lil faster but most of u guys like 2 b dicks so thabnx 2 the few ppl who have helped me

Just a few words of advice: Use proper English Grammar and you might get some respect here. I am not trying to mock you but even I had a hard time trying to figure out what you are saying.

**SXE MX6** · 12-6-06, 8:50

ok, if you mean that I didn't help you.....i'm gonna slap you up side the head!!

WHY....and i'll say it again........WHYdo you need a boost gauge, cone filter, or even a boost controller, if you want to blow up your engine???
ARE YOU EVEN READING?????????????????????
12psi, WILL NOT blow up your engine! You will also not get anymore than 12psi out of your car, since you don't have a ecu chip!
So, if you want to BLOW UP YOUR ENGINE, save your $$$$ and stop buying crap you don't need! Stop asking stupid questions, go buy a chip, install it, remove your wastegate line, and have fun!!!!

That is all !!!

PS, I'm not getting mad, its just some people can't read correct! LOL

Quote:

Originally Posted by stock88mx6gt

ok yeah i did go 2 school but the way i type is faster and it still get the point across right u know what i am sayin so there 4 u can all eat a dick and there is like 2 nice ppl out there tryin 2 help and I AM GETTIN A NEW MOTOR u ppl must not read right cuz i am going 2 boost it at 12psi cuz i have a boost gauge i cone filter and a exhaust at the end of the week so ya i just wanna make it a lil faster but most of u guys like 2 b dicks so thabnx 2 the few ppl who have helped me

12-5-06, 10:16	#16 (permalink)
SXE MX6 Join Date: May 2004 Location: , Close to Niagara Falls CA Age: 30 iTrader: (2)	He wants to blow his engine up......... SO.......AS I HAVE ALREADY SAID, easiest thing to do is, #1, get a ecu chip to eliminate boost cut #2 remove your wastegate line completely, and boost away! You'll have the most boost your ever gonna get, and yes you will blow up your engine!!
	*Gettin blown by one 19yr old...NICE!! Gettin blown by two...PRICELESS!!* 89 MX6 Turbo......waiting for the road again....someday....maybe!!! 89 626 Turbo Hatch....everyday driver! 89 ZX7 wishing it was turbo...... *Wife's cars-* 2001 Echo(driver) / 1991 GT Mustang(summer)

12-5-06, 13:53	#18 (permalink)
AMD IS THE BEST Join Date: May 2003 Location: Schenectady, NY, USA Age: 23 iTrader: (0)	Drain the oil and fill it up with H20 (Brita), should run like a champ. Be sure to change the H20 filter though.
	90' PGT, FE-DOHC, GT35R, MSnS - 13.2 @ 114 - RIP 2001 Audi S4 - Stage 3 - 11.8 @ 121.5 99.5 Audi A4 DD

12-5-06, 16:26	#22 (permalink)
SXE MX6 Join Date: May 2004 Location: , Close to Niagara Falls CA Age: 30 iTrader: (2)	LMFAO @ "RUBY"......... and why sokarul, would he even bother hooking up his supaaaaaa duuuuupaaaaaa BOOOOOOOOOOST controoolaa, if in fact, he want to blow it up, which is kinda making my eye twich........ buddy, you wasted your $$$ on a controller, when what you should have bought is a speed racer ecu chip from ebay!
	*Gettin blown by one 19yr old...NICE!! Gettin blown by two...PRICELESS!!* 89 MX6 Turbo......waiting for the road again....someday....maybe!!! 89 626 Turbo Hatch....everyday driver! 89 ZX7 wishing it was turbo...... *Wife's cars-* 2001 Echo(driver) / 1991 GT Mustang(summer)

12-5-06, 19:16	#23 (permalink)
MazdaMan069 Join Date: Jun 2002 Location: Marshall, IL, USA Age: 23 iTrader: (2)	Just start it up and hold it to the floor. Make sure the engine is ice cold first. Then when you get the new engine, make it fast.
	88' MX6 GT with a 50 trim T3, ACT clutch

12-5-06, 15:02	#20 (permalink)
sokarul Banned Join Date: Oct 2003 Location: Golden, CO, USA Age: 24 iTrader: (0)	You dont need a T. Just put the boost controler in the place of the stock boost solenoid. The line should go from the turbo compressor housing to the boost controler, then to the wastegate.

12-5-06, 20:28	#24 (permalink)
91turbo666 Join Date: Aug 2005 Location: Canberra, Australia iTrader: (0)	even if you are swapping the engine dont be so fast in trying to push as much power out of it for [shizzle]s and giggles otherwise you might bust something else in the process. not to mention running into a kerb or something. if you were scrapping the whole car i guess it wouldnt matter really, but since you want to save the car...

12-5-06, 21:34	#26 (permalink)
Jon Banned Join Date: Feb 2002 Location: Redmond, WA, USA iTrader: (0)	I lik 2 typ lik im txting!

12-5-06, 21:57	#28 (permalink)
Jon Banned Join Date: Feb 2002 Location: Redmond, WA, USA iTrader: (0)	Yes, I did Google Image Search it...and no, I would not reccomend doing that.