WTB: AC Parts 1gen - Page 3

**allmazda** · 5-4-08, 3:18

You do not need that relay. Find a horn relay. The H310 is a 20amp normal open relay. There are several other relays you could use. Horn is the best to use as it is covered by the black cover. Therefore it seems to be protected from the weather.

Go to a junk and look at some other Mazda relays. Look at the plug side and find one the says

NO Coil
NO Coil

or could be Coil NO
Coil NO

Do not use on that says NC which is normally closed.

Might have to clean the plug end to see the letter.

If you can not find one I will send you one.

**LMB__** · 5-4-08, 4:01

ok thats good

i have a spare parts car with lots of relays, so i can just use one from it

. but still need the line/pipe

**Red-Gt'r** · 5-7-08, 1:14

I'll check the shop for that line, I'm pretty sure I have it still. I don't recall throwing any of that stuff away.

**LMB__** · 5-7-08, 8:06

had been great if you have it

pm me

**Red-Gt'r** · 5-14-08, 11:45

There it is, o-rings are still good, nothing wrong with it. If you still want it PM me.

**LMB__** · 5-14-08, 13:26

you are pmed

**DarkMx-6** · 5-15-08, 10:39

Would ones off a dx mx6 work? 2.2l n/a

**Red-Gt'r** · 5-15-08, 11:09

I'm sending the line away to Norway today, thanks LMB__!

**LMB__** · 5-15-08, 13:24

line on the way

dont need annything at the moment... until i break a new ac line :P

**fred_lite** · 5-15-08, 13:50

finally found

after a 10 months search and half a dozen lines broken in the process

**DarkMx-6** · 5-15-08, 15:25

Need a spare?
LOL
Ask NSXR I sent him some stuff, I'll send it to you for cheap too.

**Red-Gt'r** · 7-7-08, 20:22

Cool (pun intended)...Glad to hear ya got it! Be careful with that baby...wouldn't want to crack it during installation

5-4-08, 4:01	#32 (permalink)
LMB__ Join Date: Feb 2006 Location: Hedmark, Norway iTrader: (1)	ok thats good i have a spare parts car with lots of relays, so i can just use one from it . but still need the line/pipe
	The Norwegian Reinforcement Squad Mazda 626 2.3i 16v DOCH 1988 Mazda 626 2.2i 4WD 1990 (soon to be turbo?)

5-7-08, 1:14	#33 (permalink)
Red-Gt'r Join Date: Mar 2006 Location: , Canada Age: 26 iTrader: (0)	AC Line I'll check the shop for that line, I'm pretty sure I have it still. I don't recall throwing any of that stuff away.
	"Imagination is more important than knowledge." - Albert Einstein

5-7-08, 8:06	#34 (permalink)
LMB__ Join Date: Feb 2006 Location: Hedmark, Norway iTrader: (1)	had been great if you have it pm me
	The Norwegian Reinforcement Squad Mazda 626 2.3i 16v DOCH 1988 Mazda 626 2.2i 4WD 1990 (soon to be turbo?)

5-14-08, 11:45	#35 (permalink)
Red-Gt'r Join Date: Mar 2006 Location: , Canada Age: 26 iTrader: (0)	There it is, o-rings are still good, nothing wrong with it. If you still want it PM me.
	"Imagination is more important than knowledge." - Albert Einstein

5-14-08, 13:26	#36 (permalink)
LMB__ Join Date: Feb 2006 Location: Hedmark, Norway iTrader: (1)	you are pmed
	The Norwegian Reinforcement Squad Mazda 626 2.3i 16v DOCH 1988 Mazda 626 2.2i 4WD 1990 (soon to be turbo?)

5-4-08, 3:18	#31 (permalink)
allmazda Join Date: Mar 2002 Location: , NC iTrader: (2)	You do not need that relay. Find a horn relay. The H310 is a 20amp normal open relay. There are several other relays you could use. Horn is the best to use as it is covered by the black cover. Therefore it seems to be protected from the weather. Go to a junk and look at some other Mazda relays. Look at the plug side and find one the says NO Coil NO Coil or could be Coil NO Coil NO Do not use on that says NC which is normally closed. Might have to clean the plug end to see the letter. If you can not find one I will send you one.

5-15-08, 10:39	#37 (permalink)
DarkMx-6 Join Date: Jun 2005 Location: Keene, TX, USA Age: 22 iTrader: (4)	Would ones off a dx mx6 work? 2.2l n/a
	91 White mx6 GT: Boosted N/A block, Fidanza, 9 psi, open down pipe 90 Red mx6 GT: No engine 78,000 miles 92 Green mx6 DX: parts car Gone (CRUSHED) 04 Civic: The daily, CAI, No muffler(sounds way better than ricers, people ask what kind of muffler i have cuz they like it LOL) Great on gas

5-15-08, 11:09	#38 (permalink)
Red-Gt'r Join Date: Mar 2006 Location: , Canada Age: 26 iTrader: (0)	I'm sending the line away to Norway today, thanks LMB__!
	"Imagination is more important than knowledge." - Albert Einstein

5-15-08, 13:24	#39 (permalink)
LMB__ Join Date: Feb 2006 Location: Hedmark, Norway iTrader: (1)	line on the way dont need annything at the moment... until i break a new ac line :P
	The Norwegian Reinforcement Squad Mazda 626 2.3i 16v DOCH 1988 Mazda 626 2.2i 4WD 1990 (soon to be turbo?)

5-15-08, 13:50	#40 (permalink)
fred_lite Join Date: Oct 2005 Location: joliette,qc, Canada Age: 34 iTrader: (9)	finally found after a 10 months search and half a dozen lines broken in the process
	SUPPORT THE ROYAL 22

5-15-08, 15:25	#41 (permalink)
DarkMx-6 Join Date: Jun 2005 Location: Keene, TX, USA Age: 22 iTrader: (4)	Need a spare? LOL Ask NSXR I sent him some stuff, I'll send it to you for cheap too.
	91 White mx6 GT: Boosted N/A block, Fidanza, 9 psi, open down pipe 90 Red mx6 GT: No engine 78,000 miles 92 Green mx6 DX: parts car Gone (CRUSHED) 04 Civic: The daily, CAI, No muffler(sounds way better than ricers, people ask what kind of muffler i have cuz they like it LOL) Great on gas

7-7-08, 20:22	#42 (permalink)
Red-Gt'r Join Date: Mar 2006 Location: , Canada Age: 26 iTrader: (0)	Cool (pun intended)...Glad to hear ya got it! Be careful with that baby...wouldn't want to crack it during installation
	"Imagination is more important than knowledge." - Albert Einstein