SA Chat Thread - Page 17

**tx5turbo** · 1-24-07, 5:05

It says on the headlight housing under the bonnet, I think its H4 and H3 but check first. I got super white bulbs cost me under $30 from ebay. They were OSRAM ones too, not cheap chinese.

**PSI626** · 1-24-07, 5:13

easy i had a pair giving to me, they were good till one stopped working. they didnt seem brighter to drive with but looked better looking from the front of the car.

installs easy, unscrew the large cover at the back of the light, un clip the wire holder, pull out the bulb and disconect the wiring. reverse to install.

there are two different sizes of collars around the bulb, so have a look to see what size to buy, my car had one of each size so i had to modify one to fit, but not too hard with some tin snips, just make sure you get the larger ones if they dont match.

**PSI626** · 1-24-07, 5:17

Ok Dion is it time to start organising the next cruise? starting to get that twitch in my neck again

from not cruising.

**Redmx_tx5** · 1-24-07, 5:36

DID I HEAR CRUISE?

Awesome. Also.

I only need to paint 6 more small bits of the car, like head lights ect ect.

And then it needs a good hand polish! and done!!!

Looking Freakin Crazy! Should be done this week end!!!!

**Cromax** · 1-24-07, 5:50

Hello all ... ex-adelaidian here (a lot of you are new, so you may not know me). I'm coming back to adelaide for a weekend some time in february to visit some family who I really need to catch up with. I'm not sure what weekend it'll be yet, are there any cruises or anything happening? May grace you with my presence if y'all are organising anything.

Anyway, let me know of any plans/happenings/dinner+cruises etc. happening, and I'll factor it into my travels

Cheerio,

Nate.

son_ya · 1-24-07, 9:54

gday everyone! i am new and i have a red 1988 mx6 turbo and i would like to get to know some people! especially in sa!

**PSI626** · 1-25-07, 3:56

Hey Son_ya welcome to the sa thread

we need another 1st gen around here! tell us a bit about yourself, where in sa (ade) ya from a bit about your car ect.
the sa mod is to organise the next meet so i should'nt be too far away we hope

**fetelstarTX5** · 1-25-07, 4:24

Wow this thread has grown since I was last here.....

I agree about another cruise, car is gathering too much dust! Hopefully I can get some new rear springs and a wheel alignment before this one.....

**tx5turbo** · 1-25-07, 6:21

Quote:

Originally Posted by PSI626

Ok Dion is it time to start organising the next cruise? starting to get that twitch in my neck again

from not cruising.

I dont have time to go on a cruise let alone organise one. But it is coming

banditojones · 1-25-07, 19:29

Quote:

Originally Posted by Cromax

Anyway, let me know of any plans/happenings/dinner+cruises etc. happening, and I'll factor it into my travels

Well Cromax let us know exactly what weekend you will be here and we will see if we can organise something for the same time, my bad luck with my car just keeps getting worse parked it at the building site in the safest place I can think of and some idiot still managed to hit my car and leave a fair dent in my drivers quarter panel now I have to get a new one, seriously not happy

**Redmx_tx5** · 1-25-07, 21:39

Quote:

Originally Posted by son_ya

gday everyone! i am new and i have a red 1988 mx6 turbo and i would like to get to know some people! especially in sa!

I have seen your mx6!! Looks very nice!

demo · 1-26-07, 19:21

hey fellow crow eaters just saying hello and introducing myself.i have a 2g manual stock at the moment and live on the west coast about 430ks from adelaide.it*s probably been asked in a forum some where what offset does the 2g have or what sizerims do other members run on their 2gs cheers to all demo

sleepin_mx6 · 1-26-07, 19:33

Hey, fairly new to mx6.com. i have a blue 89 mx6 17' rsgt wheels, exhaust. stereo and a few bits n pieces. im havin trouble with the mounting of me FMIC and the pipe work, i havent started yet but i wouldnt mind some ideas. any way itd be good to get to know some 6ers in sa. i dont no any

demo · 1-27-07, 17:36

heya matt just use the search button up the top.type in what your after and read the appropriate threads.i think i answered my own question there hey. cheers demo

**PSI626** · 1-27-07, 18:09

Nice to meet you sleepin and demo,
Demo, Biggles should know what fits to a 2gen so im sure it wont be long till she pops her head in here answers that one for you

Sleepin are you trying to install a fmic with a stock bar? if so your going to have to cut it up a bit. do a search in forced induction (just noticed you posted in there lol), make sure your not putting in a larger FM than your system needs as you will loose power from lag.

If anybody else would like to organise a cruise, go for it because by the time Dion might get around to it we could enter the Bay to Birdwood, being a mod of a site must take up alot of your time lol

1-24-07, 5:05	#241 (permalink)
tx5turbo Join Date: Mar 2005 Location: Adelaide, Australia iTrader: (1)	It says on the headlight housing under the bonnet, I think its H4 and H3 but check first. I got super white bulbs cost me under $30 from ebay. They were OSRAM ones too, not cheap chinese.
	R32 GTS-T

1-24-07, 5:13	#242 (permalink)
PSI626 Join Date: Feb 2005 Location: Adealide S.A., Australia iTrader: (0)	easy i had a pair giving to me, they were good till one stopped working. they didnt seem brighter to drive with but looked better looking from the front of the car. installs easy, unscrew the large cover at the back of the light, un clip the wire holder, pull out the bulb and disconect the wiring. reverse to install. there are two different sizes of collars around the bulb, so have a look to see what size to buy, my car had one of each size so i had to modify one to fit, but not too hard with some tin snips, just make sure you get the larger ones if they dont match.
	89 GD 626 TURBO Mods- T/S Cabin B/Controller, T/S BOV, Ram Air, K&N Panel Fillter, MOMO D Wheel, White/Indiglo Gauges, Turbo Timer, 21/2' Exhaust, MP3, Custom Door Pods, 12' Sub, WRX Twin Pot Brakes, 17' RJR Racers, Kings Superlows, KYB Shocks & Rear Strut Brace,

1-24-07, 5:17	#243 (permalink)
PSI626 Join Date: Feb 2005 Location: Adealide S.A., Australia iTrader: (0)	Ok Dion is it time to start organising the next cruise? starting to get that twitch in my neck again from not cruising.
	89 GD 626 TURBO Mods- T/S Cabin B/Controller, T/S BOV, Ram Air, K&N Panel Fillter, MOMO D Wheel, White/Indiglo Gauges, Turbo Timer, 21/2' Exhaust, MP3, Custom Door Pods, 12' Sub, WRX Twin Pot Brakes, 17' RJR Racers, Kings Superlows, KYB Shocks & Rear Strut Brace,

1-24-07, 5:36	#244 (permalink)
Redmx_tx5 Join Date: Nov 2006 Location: Adelaide, Australia iTrader: (3)	DID I HEAR CRUISE? Awesome. Also. I only need to paint 6 more small bits of the car, like head lights ect ect. And then it needs a good hand polish! and done!!! Looking Freakin Crazy! Should be done this week end!!!!
	CAR: KLDE TX5 \\

1-24-07, 5:50	#245 (permalink)
Cromax Join Date: Apr 2003 Location: Melbourne, Victoria, Australia Age: 26 iTrader: (0)	Hello all ... ex-adelaidian here (a lot of you are new, so you may not know me). I'm coming back to adelaide for a weekend some time in february to visit some family who I really need to catch up with. I'm not sure what weekend it'll be yet, are there any cruises or anything happening? May grace you with my presence if y'all are organising anything. Anyway, let me know of any plans/happenings/dinner+cruises etc. happening, and I'll factor it into my travels Cheerio, Nate.
	1993 Mazda MX6 4WS 2004 Mazda RX8 Luxury "If it was so, it might be; and it were so, it would be; but as it isn't, it ain't. That's logic." - Lewis Carrol

1-24-07, 9:54	#246 (permalink)
son_ya Join Date: Dec 2006 Location: iTrader: (0)	gday everyone! i am new and i have a red 1988 mx6 turbo and i would like to get to know some people! especially in sa!
son_ya Join Date: Dec 2006 Location: iTrader: (0)

1-25-07, 3:56	#247 (permalink)
PSI626 Join Date: Feb 2005 Location: Adealide S.A., Australia iTrader: (0)	Hey Son_ya welcome to the sa thread we need another 1st gen around here! tell us a bit about yourself, where in sa (ade) ya from a bit about your car ect. the sa mod is to organise the next meet so i should'nt be too far away we hope
	89 GD 626 TURBO Mods- T/S Cabin B/Controller, T/S BOV, Ram Air, K&N Panel Fillter, MOMO D Wheel, White/Indiglo Gauges, Turbo Timer, 21/2' Exhaust, MP3, Custom Door Pods, 12' Sub, WRX Twin Pot Brakes, 17' RJR Racers, Kings Superlows, KYB Shocks & Rear Strut Brace,

1-25-07, 4:24	#248 (permalink)
fetelstarTX5 Join Date: Jan 2006 Location: SA, Australia iTrader: (0)	Wow this thread has grown since I was last here..... I agree about another cruise, car is gathering too much dust! Hopefully I can get some new rear springs and a wheel alignment before this one.....

1-26-07, 19:21	#252 (permalink)
demo New Member Join Date: Jul 2005 Location: iTrader: (0)	sa chat thread hey fellow crow eaters just saying hello and introducing myself.i have a 2g manual stock at the moment and live on the west coast about 430ks from adelaide.it*s probably been asked in a forum some where what offset does the 2g have or what sizerims do other members run on their 2gs cheers to all demo

1-26-07, 19:33	#253 (permalink)
sleepin_mx6 New Member Join Date: Jan 2007 Location: Port Pirie, Australia Age: 21 iTrader: (0)	Hey, fairly new to mx6.com. i have a blue 89 mx6 17' rsgt wheels, exhaust. stereo and a few bits n pieces. im havin trouble with the mounting of me FMIC and the pipe work, i havent started yet but i wouldnt mind some ideas. any way itd be good to get to know some 6ers in sa. i dont no any

1-27-07, 17:36	#254 (permalink)
demo New Member Join Date: Jul 2005 Location: iTrader: (0)	sa chat thread heya matt just use the search button up the top.type in what your after and read the appropriate threads.i think i answered my own question there hey. cheers demo

1-27-07, 18:09	#255 (permalink)
PSI626 Join Date: Feb 2005 Location: Adealide S.A., Australia iTrader: (0)	Nice to meet you sleepin and demo, Demo, Biggles should know what fits to a 2gen so im sure it wont be long till she pops her head in here answers that one for you Sleepin are you trying to install a fmic with a stock bar? if so your going to have to cut it up a bit. do a search in forced induction (just noticed you posted in there lol), make sure your not putting in a larger FM than your system needs as you will loose power from lag. If anybody else would like to organise a cruise, go for it because by the time Dion might get around to it we could enter the Bay to Birdwood, being a mod of a site must take up alot of your time lol
	89 GD 626 TURBO Mods- T/S Cabin B/Controller, T/S BOV, Ram Air, K&N Panel Fillter, MOMO D Wheel, White/Indiglo Gauges, Turbo Timer, 21/2' Exhaust, MP3, Custom Door Pods, 12' Sub, WRX Twin Pot Brakes, 17' RJR Racers, Kings Superlows, KYB Shocks & Rear Strut Brace,