If anyone wants to make an offer you are more than welcome to...thanks
96 MX6 F/S Possible Project
4
Well, this car is a 96. Body has roughly 145K on it. KLZE has possible 50K. Needs work, Full kit, only back bumper mounted though. Have invader front and sides. 5 Speed with staged clutch just rebuilt when ZE was installed. About 1000 miles on it. I've just lost interest in this car for some reason. Also has 16" ICW 10 spokes. Fairly new tires. One needs replacing possibly two. Asking 2300 obo considering the KLZE and body kit...here are some photos. Don't have one of the engine bay but there is one of the motor (KLZE) not installed
![]()
The Intake Mani. on the motor is different. But I have two more intake mani. and a throttle body and a KLDE head. It all comes with the car.
![]()
![]()
![]()
The Intake Mani. on the motor is different. But I have two more intake mani. and a throttle body and a KLDE head. It all comes with the car.
- Status
- Not open for further replies.
1 - 20 of 23 Posts
This thing runs and drives, right? What all work does it need done?
Ok yes, it runs and drives. I drive it every day. Needs vacuum lines replaced (all of them to do it right and gaskets if your REALLY nit picky), Injector O-Rings, Needs a new throttle body and gasket but don't have to have. BODY WORK, and a shifter. It's gotta short throw but the o rings broke so now I can move my shifter about 6 inches up and down. Doesn't have a radio, some jack A$$ cut the factory harness out of it and I just wired it up the best I could, the ground in the fuse box is shot or something, wouldnt stay on so i took the whole thing out of it. Tired of workin on it, just want it gone.
hey part me out the v/c if you willing i WANT IT =)
Do you happen to have some black floormats?
How about a nearly stock '95 LS 5-Speed which needs little work, and $500? Also comes with some spare parts, I'd have to check what all I have, but if you're interested I might consider doing that trade, if you would.
I thought about just parting this car out. Cause I could probably get more out of it lol, but yea floor mats are black I believe. It was a black leather int. but I can't remember off the top of my head if they are black or grey.
trading on this car is really not possible cause I still owe money on. Had to put the car up as colaterall for a loan...blows but thats life.
Also NOT SURE WHAT THE V/C is...get back to me on that one.
As far as parting it out. what I have is listed.
Motor - KLZE (less than 50K) 5 speed tranny with stage 2 clutch, not sure of brand (just rebuilt)
16" in ICW 10 spokes - Tires on 3 wheels moderate tread 1 of them needs replacing
Interior - Black leather, front seats NOT avalible, every thing else decent. Dash and center console no good. PLEASE DONT ASK
Body kit - BC rear, invader front and sides, front bumper has been cut in two, needs to be shaved and molded back together, too big.
Trunk lid and spoiler - Good condition, no brake light in spoiler, trunk dynomated in side.
Other body parts can send pics of
Just let me know what ya need. May or may not have it. Parking the car anyways soon so it's gonna be avalible to part.
trading on this car is really not possible cause I still owe money on. Had to put the car up as colaterall for a loan...blows but thats life.
Also NOT SURE WHAT THE V/C is...get back to me on that one.
As far as parting it out. what I have is listed.
Motor - KLZE (less than 50K) 5 speed tranny with stage 2 clutch, not sure of brand (just rebuilt)
16" in ICW 10 spokes - Tires on 3 wheels moderate tread 1 of them needs replacing
Interior - Black leather, front seats NOT avalible, every thing else decent. Dash and center console no good. PLEASE DONT ASK
Body kit - BC rear, invader front and sides, front bumper has been cut in two, needs to be shaved and molded back together, too big.
Trunk lid and spoiler - Good condition, no brake light in spoiler, trunk dynomated in side.
Other body parts can send pics of
Just let me know what ya need. May or may not have it. Parking the car anyways soon so it's gonna be avalible to part.
V/C = valve cover you have the raised lettering i want =)
Still parting this car out.
Mazda Parter, I want to keep the motor intact if all possible BUT I may have another raised lettering V/C I'll check this evening and let you know. Thanks
Mazda Parter, I want to keep the motor intact if all possible BUT I may have another raised lettering V/C I'll check this evening and let you know. Thanks
What all is stil on the car? I live in lincolnton nc so I might be interested in pulling some parts
Ah, lets see...everything but the radiator breather cap, fenders and hood i availble.... Oh and exhaust is gone. Your welcome to come check it out. Your not that far away...What are you looking for?What all is stil on the car? I live in lincolnton nc so I might be interested in pulling some parts
What all is stil on the car? I live in lincolnton nc so I might be interested in pulling some parts
You got a private message...
oh muh goodness, noone in this area has these cars for sale!!! i can see why you're tired of workin on it, they're never ending project cars... I'm near asheville (hendo) and I'm in dire need of a car... you think we could work something out? I could get a loan and pay for her in full. It would help out a lot... if you're down I can give you my number, we could go from there... ?
Thanks for even considerin it,
Rhiannon
Thanks for even considerin it,
Rhiannon
Well, this car is being parted out. BUT she still runs. Right now all it needs is fenders hood front/rear bumpers and exhaust from the downpipe. AND THE REST is well pretty much project. Are you looking for something to drive daily? Or what? I tell you what just check your private message I'll send my number and you can give me a call about it. Much easier to discuss over the phone. Thanks for the intrest.oh muh goodness, noone in this area has these cars for sale!!! i can see why you're tired of workin on it, they're never ending project cars... I'm near asheville (hendo) and I'm in dire need of a car... you think we could work something out? I could get a loan and pay for her in full. It would help out a lot... if you're down I can give you my number, we could go from there... ?
Thanks for even considerin it,
Rhiannon
EDIT: well you don't have private messaging setup. so the number is 828 320 6590.
Anyone else can use this number. Best means of contact.
THANKS
ok, well, thanks so much, if the other guy falls through, definately it me up, I want her.
Rhiannon
Rhiannon
Are you still interested in looking at this car to pull parts? If so let me know....What all is stil on the car? I live in lincolnton nc so I might be interested in pulling some parts
do you have a intake manifold for a klde v6?
How much are you looking for the KL-ZE only (and whatever else, don't they need a JDM ecu too?)
PM me please
-Chris
PM me please
-Chris
im interested in the tranny. i have 93 v6 manuel. would urs work im not sure. if so how much u asking.
1 - 20 of 23 Posts
- Status
- Not open for further replies.
Mazda MX-6 Forum
A forum community dedicated to Mazda MX-6 owners and enthusiasts. Come join the discussion about restorations, performance, upgrades, modifications, classifieds, troubleshooting, maintenance, and more!
Full Forum Listing
Explore Our Forums
Recommended Communities
