Mazda MX-6 Forum banner
1 - 1 of 1 Posts

159 Posts
Simple, just open the pass. door and get as far under dash as you
can, then put your hand up there and you'll feel the hole in the firewall that the hose goes thru. Now just stick the loose end of the hose thru the hole. If it still leaks, get a small clamp and put it
over the end where it attaches to the tube outlet. Easy fix...also, you might want to pull the hose off and clean it out to make sure
water flows is a poorly designed system IMO.
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.