Mazda MX-6 Forum banner
1 - 1 of 1 Posts

737 Posts
Discussion Starter · #1 ·
I went to my local auto zone and did a little digging. I had the counter guy grab stock end links for the 88 Mazda mx6 Front. I matched them up to a Energy Suspension set and I did the same for the rear, except I used an endlink set for the 91 Ford probe to match up. Here are my results.

Front endlink p/n's: 9.8125RC
Rear endlink p/n's: 9.8120RC

I've seen many different part numbers in threads and just wanted to try and help others out in the future. Other p/n's may work, I just want to say that the part numbers listed were within an 1/8 of an inch in length to the stock ones. I am going to write this info down and make sure I don't lose it, just incase someone gets stuck like I did. If anyone knows other part numbers that will fit too, please feel free to add to the list.
1 - 1 of 1 Posts