Mazda MX-6 Forum banner

Status
Not open for further replies.
1 - 1 of 1 Posts

·
Registered
Joined
·
1,719 Posts
Discussion Starter #1
Why does Idle falls when test connector is grounded

I have learned that it is normal for the idle to fall to about 500 when the test connector is grounded. This is supposed to be because the ecu is not running on previous settings and idle is now bieng controlled by inputs from various sensors.

Your idle may fall more, but everything should be ok as long as it doesnt stall.
 
1 - 1 of 1 Posts
Status
Not open for further replies.
Top