Mazda MX-6 Forum banner

1 - 2 of 2 Posts

·
Premium Member
Joined
·
4,334 Posts
Discussion Starter #1 (Edited)
The end result.

Once cut in, i filled gaps with hot glue and painted the facia black.



The boost gauge side.

Here you can see the white and black bridging links that i had to make up after cutting up the PCB. The top red wire and the next black wire power the A/F gauge when IG is on.

Boost gauge again. Wire coming of it is for the boost gauge lighting (twisted black pair).



A/F gauge side. The capacitor wrapped in red tape was originally under the bottom PCB, but i had to relocate it so i could get the A/F as flush as possible.

[ Comments ]
 
1 - 2 of 2 Posts
Top