Mazda MX-6 Forum banner

1 - 5 of 5 Posts

·
Registered
Joined
·
3,092 Posts
Discussion Starter #1
Check and see if you can see where a harness is connected to...

its a white plug that comes out of the same group as the O2 sensor. it sits underneath the airbox, above the tranny... someone with a 4-cyl MTX would be preferable but if you have the plug, lemme know where it hooks up to...

Thanx.
 

·
Registered
Joined
·
154 Posts
ok i just got done lookin and if the white plug thing is flat it looks like it connects to the tranny (under the airbox close to the mass air sensor)ok once i find my shop manual i will give you better directions!
 

·
Registered
Joined
·
3,092 Posts
Discussion Starter #3
thats what i though... the reverse switch... you have an MTX?
 

·
Registered
Joined
·
154 Posts
yea i have a mtx i hate automatic crap. did you hook it up or find where it go's?
 

·
Registered
Joined
·
3,092 Posts
Discussion Starter #5
im pretty sure its the reverse switch... the tranny shop was nice enough to cut my wires right at the switch...

ill be making them pay for one when i take it back to them...

WAIT... thats not the one... i know which one youre talkin about... it has like 4 or 5 wires comin out of it...

can you check UNDER the car, on the tranny (towards the front side) for something with 2 wires comin out of it... and see if it connects to a white plug...
 
1 - 5 of 5 Posts
Top