Mazda MX-6 Forum banner

1 - 7 of 7 Posts

·
Registered
Joined
·
793 Posts
Discussion Starter #1
which vacuum lines go where on the first gen turbo?
ive got two lines coming from inlet mani, one is for bov,
the previous owner had a bleed valve on it i cant remember how i ripped it off.
just want to hook it up without the bleed valve.
any one got info or pics?
 

·
Registered
Joined
·
2,813 Posts
there should be 2 nippples that the bleed valve goes inbetween, basically one that goes to the compressor housing, ie which then sends itself to inlet mani, as we dojnt have a hose that goes direct from turbo to inlet mani, and then there the wastegate actuator.

for stock boost, just have the one hose from comp housing cover to wg actuator.

1/4" hose by memory
 

·
Registered
Joined
·
793 Posts
Discussion Starter #3
so no hoses go to inlet mani from turbo?
what would the two lines coming from inlet mani b for?
they are both long enough to reach the turbo or bov?
 

·
Registered
Joined
·
2,813 Posts
yep, so none from turbo goto IM, the ones from IM are what shibbs sed
 

·
Registered
Joined
·
1,334 Posts
yep thats correct. Only one from the BOV goes to the inlet. mysteriously i had one from the wastegate go to the inlet and one other hose just hanging connected to no where on the turbo but got it fixed so no hose from turbo to inlet except the BOV....

you got one short hose goes to the IC piping just under the bov pipe and thats all...
 
1 - 7 of 7 Posts
Top