Mazda MX-6 Forum banner
1 - 6 of 6 Posts

·
Registered
Joined
·
157 Posts
Discussion Starter · #1 ·
Like topic says looking at the log style mani jgs tools sells wondering if anybody uses it.

Thanks
Nathan
 

·
Registered
Joined
·
607 Posts
They have ever flange imaginable. I am having them make me a log header with the vj11 flange since i have the .50/.48 (stock exhaust side that was bored out and machined with a clipped .48 wheel).

But if you are not going the hybrid way then I would definitely get either a t3/t4 flange or even DSM flange welded on and slap a big 16g or 20g turbo on the 6 :) .

-Zook
 

·
Registered
Joined
·
1,636 Posts
I just bought a JGS manifold and it looks like I'm going to have to cut some of the parts to make it fit correctly. The 2 "T"s (tubing) that came with it do not line up and touch each other so I'm going to have to do some extending. I have a T3/T04B .48/.60 turbo that I plan on using. I almost have all the parts to get this bad boy up and running. All I need now is a 255 lph Walbro fuel pump and an FMU.
 
1 - 6 of 6 Posts
Top