Ok, i found out a few days ago my car was leaking oil, wasnt sure of the cause, but it was coming from the valve cover (so I'm thinkin valve cover gasket). But i had only lost about a quart in a month, so i figured it would be fine for a while. But then the car sits for the next to days cuz the alt belt snapped and i had to get one and put it on. So i install the new belt, tighten it down, start up the car and then....ass-action. The engine was bearly able to keep from dying, was reving between like 500 rpms and 1000 rpms and when i tried to drive it it wouldn't accelerate at all really, very very slowly neway. So then i check my spark plugs....i pull out the wires, and see that all the wires except to 2 in the middle (I have the v6) of each valve cover are like soaked in oil, as well as the plugs. So then i decide to change the valve cover gasket (holy crap was this hard!!!). Finally get it done, and we thought we did everything right but when i started it up it just died right away. I was able to keep it alive and drive it by constantly revving it, but as soon as i let off the gas in neutral it dies in a matter of seconds. So then we think maybe i should just replace the plugs and wires and everything will be good. I just finished doing that and now it starts up fine at first, but then immediatley wants to die if i dont press the gas. So now i have no clue wat it could be, except:
There's a white plug with to holes in it thats not attached, and i dont remember if it plugged into nething before, if it does, i cant find it. The plug is directly underneath the intake manifold and i could have unplugged it when i had to remove the intake manifold to get to the top valve cover (theres so many hoses and plugs, but i didnt see ne others that weren't connected. So if neone knows about this plug or if neone have or could take pics of their engine bay i would greatly appreciate it. thanx
There's a white plug with to holes in it thats not attached, and i dont remember if it plugged into nething before, if it does, i cant find it. The plug is directly underneath the intake manifold and i could have unplugged it when i had to remove the intake manifold to get to the top valve cover (theres so many hoses and plugs, but i didnt see ne others that weren't connected. So if neone knows about this plug or if neone have or could take pics of their engine bay i would greatly appreciate it. thanx