Mazda MX-6 Forum banner
1 - 3 of 3 Posts
G

·
Discussion Starter · #1 ·
After countless hours of going through the 'Search' option I have given up. I am going to lower my car. I have stock rims right now. I am going to get 18x7 Focal F5's. I am going to go with springs instead of Coil-overs because that is the way to go. The kicker is I do not want a wheel gap at all. If at all possible I want it to be flush with the bottom of the fender. Or atmost 1/2 inch clearence. Is this possible with rubbing the spring, fender, or something? Trying to get it ready for Nopi and need help. Thanks!

Trevis
 

·
Registered
Joined
·
641 Posts
I have 18x8 wheels with 225/40 rubber. They don't rub at all. To get it how you want it you'll need to have a wheel that has a great enought positive offset to have the wheel lip inside of the fender. With 18x7s you may be able to get some wheels with a big positive offset without hitting the springs. You may also want to roll the fenders just in case.
 
1 - 3 of 3 Posts
Top