Mazda MX-6 Forum banner

1 - 4 of 4 Posts

·
Registered
Joined
·
116 Posts
Discussion Starter #1
Hey howz it going all, once again I need you guys expertise. I found out last week that my rear stabilizer link on the driver side broke. The bolts holding the link together broke. I called mazda and it would cost $80 cnd for that link. Is there any aftermarket rear stabilizer and if there are would it increase handling and if so is it worth it for the price. thnks

keep cruizin
 

·
Registered
Joined
·
1,306 Posts
Mazdasped makes a sway bar and also addco. You can go to http://www.corksport.com for the Mazdaspeed one and go to http://www.summitracing.com for the Addco. I'm not sure if they come with end links or not but if they don't, you're going to have to modify them a little because these aftermarket ones are thicker. Addco thicker than Mazdaspeed. Some people have used Nissan endlinks but had always had problems.

I'm hearing a metal on metal sound from my rear suspension myself so I might have to look into new endlinks pretty soon.
 

·
Registered
Joined
·
74 Posts
I have the ADDCO and got my end links in a bulk buy on Probetalk.com. I had loud squeaking from the polyurethane bushings on the bar and cured that problem by wrapping the bushings with teflon tape.

Very happy with ADDCO & end links.
 

·
Registered
Joined
·
488 Posts
The Addco seems to be the most popular replacement sway bar, it realy makes the most difference in handling short of coil-overs. They will not come with endlinks, but you can get endlinks for the Nissan Altima and they are and exact replacement from only $20 usd or so.
 
1 - 4 of 4 Posts
Top