here is the exhaust plate, i have a few more pictures hiding around in some of my other posts.
![]()
Mazdaspeed Mx6 Guide w/ pictures
The goal of this thread is to make a thread listing the different Mazdaspeed parts that were available for the Mx6 with multiple pictures of everything (if possible).
IF YOU HAVE BETTER PICTURES OR NEW INFORMATION, PLEASE POST THEM HERE AND I WILL EDIT THE THREAD TO INCORPORATE EVERYTHING If you add pictures that I feel better illustrate the part(s) in question, I will copy them to my Photobucket and link it from there so that, as long as my Photobucket exists, the images in the thread will work.
Interesting note: "since Mazdaspeed items were a hot copy item in the 90's, if all it has is a sticker, it's likely a taiwanese or chinese copy. There's a small chance MS removed the FG stamping in later years/runs of certain items but this is unconfirmed. Mazdaspeed sides, lip, wing, rims, exhaust, etc. should all have hard stamping. On the body parts, this would be a raised lettering emboss. The wing had a reverse emboss. The rims have it stamped on the inside lip, with a reverse emboss on the hub side of the rim as well. The exhaust has it etched." ~Goatcrapp
NOTE: The rear pieces on the silver Mx6 are NOT Mazdaspeed pieces. The kit only offered a front lip, side skirts, and a spoiler.
For more info on those pieces, go HERE
![]()
Mazdaspeed front lip
![]()
Mazdaspeed side skirts
![]()
Mazdaspeed spoiler
![]()
Mazdaspeed reflector
![]()
![]()
![]()
Mazdaspeed wheels
![]()
![]()
Mazdaspeed muffler (??)
Mazdaspeed airbox (??)
"there was a mazdaspeed airbox available... but i've never seen anyone here with it...it was an inline filter sort of like that, with a slightly different looking inlet up front. It ran full width of the hood, and required cutting of the half rubber section on the hood (to a full length section cut out) - there was also no box, nor resonator. I've seen exactly one picture of this years ago and actually think it's a great design. There were no pics of stampings or anything like that so i can't speak about that." ~Goatcrapp
Random different Mazdaspeed pictures. Some are JDM Mazdaspeed originals and some are USDM and ESPEC models with different Mazdaspeed parts added.
![]()
![]()
![]()
![]()
![]()
![]()
![]()
![]()
![]()
![]()
![]()
![]()
![]()
IF YOU HAVE BETTER PICTURES OR NEW INFORMATION, PLEASE POST THEM HERE AND I WILL EDIT THE THREAD TO INCORPORATE EVERYTHING If you add pictures that I feel better illustrate the part(s) in question, I will copy them to my Photobucket and link it from there so that, as long as my Photobucket exists, the images in the thread will work.
Interesting note: "since Mazdaspeed items were a hot copy item in the 90's, if all it has is a sticker, it's likely a taiwanese or chinese copy. There's a small chance MS removed the FG stamping in later years/runs of certain items but this is unconfirmed. Mazdaspeed sides, lip, wing, rims, exhaust, etc. should all have hard stamping. On the body parts, this would be a raised lettering emboss. The wing had a reverse emboss. The rims have it stamped on the inside lip, with a reverse emboss on the hub side of the rim as well. The exhaust has it etched." ~Goatcrapp
NOTE: The rear pieces on the silver Mx6 are NOT Mazdaspeed pieces. The kit only offered a front lip, side skirts, and a spoiler.
For more info on those pieces, go HERE
Mazdaspeed front lip
Mazdaspeed side skirts
Mazdaspeed spoiler
Mazdaspeed reflector
Mazdaspeed wheels
Mazdaspeed muffler (??)
Mazdaspeed airbox (??)
"there was a mazdaspeed airbox available... but i've never seen anyone here with it...it was an inline filter sort of like that, with a slightly different looking inlet up front. It ran full width of the hood, and required cutting of the half rubber section on the hood (to a full length section cut out) - there was also no box, nor resonator. I've seen exactly one picture of this years ago and actually think it's a great design. There were no pics of stampings or anything like that so i can't speak about that." ~Goatcrapp
Random different Mazdaspeed pictures. Some are JDM Mazdaspeed originals and some are USDM and ESPEC models with different Mazdaspeed parts added.
22
1 - 20 of 60 Posts
up close not mounted of course:
![]()
Just dropped by to add to this thread.
Here are a few pictures of the Mazdaspeed struts
![]()
![]()
![]()
And a couple to show the difference between the stock and the MS struts
![]()
![]()
interesting they were produced by eibach.
![]()
Oh and almost forgot.
the sound of the Mazdaspeed exhaust.
here
just download to listen (worth it imho)
Hope this helps
Here are a few pictures of the Mazdaspeed struts
And a couple to show the difference between the stock and the MS struts
interesting they were produced by eibach.
Oh and almost forgot.
the sound of the Mazdaspeed exhaust.
here
just download to listen (worth it imho)
Hope this helps
6
dude... forget the rest i just want the struts.
and mby that trunk lip spoiler.
and mby that trunk lip spoiler.
I'd like to know how well they performed before I'd want them.dude... forget the rest i just want the struts.
and mby that trunk lip spoiler.
I do believe the lip spoiler isn't the MS one though, just a standard Mazda OE accessory, that for some reason didn't really make it on many, if any at all off the lines.
I just wonder why most of the MS 6's I ever see for sale online are the 2.0l V6 of all engines... Anyone got any information/reason to this?
Lotsa pics of my car in there Lookin' good !
Lookin' good !
Have you done anything to it since you bought it from Heather?Lotsa pics of my car in there
I really love the way these rims look on this car. I need a set.
Mazdaspeed exhaust
![]()
1 - 20 of 60 Posts
