Mazda MX-6 Forum banner
1 - 1 of 1 Posts

· Registered
Joined
·
486 Posts
It is possible to do the auto to manual conversion, but you will need a few more things that just the tranny. I do know that you will need to replace the drive shafts as they are a different length. There are otehr things that need to be done but I can't think of them at the moment. Amazingly enough the MTX is the same for both the I4 and the V6 with the only difference being the gearing in 3-5 gears. You should be able to use the tranny out of a Probe no problem, again the only differences being the gearing adn final drive ratio.
 
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top