Mazda MX-6 Forum banner
1 - 1 of 1 Posts

· Registered
Joined
·
824 Posts
Here is an idea that I had long time ago, but never try it. First use masking tape to cover up the design that you wanted on the tailligts(circles, or squares or whatever), then use the black paint to spray the taillights. Then remove the masking tape, and spray the taillights again with the black transparentcy paint over the whole thing.

The effect will looks almost like the J-spec RX-7 taillights, it will look black in its appearance, but when you step on the brake, only circles of light will show up.
 
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top