Mazda MX-6 Forum banner

1 - 20 of 109 Posts

·
Banned
Joined
·
27,927 Posts
Discussion Starter #1 (Edited)
The time has come for me to sell everything. I will be making an Official FOR SALE thread in the FS section within the next few weeks. This is DEFINATE. The car has sat for too long and I am never going to do anything with it....or my parts. Those of you in the know....know what I am talking about. 3" mandrel bent turbo back magnaflow everything exhaust..aluminum flywheel...southbend clutch..megasquirt...you name it I've got it. It all has to go. EVERYTHING MUST GO. This isnt a "teaser", it is not for me to start talking about what I have and for everyone to start asking prices, it's just to let everyone know that this time it is for real. it ALL has to go including the car. Erebuni front end. Erebuni sideskirts. Ricky Racer Head. Pauter rods - brand new. Head studs brand new. Evo 8 intercooler. 2.5 intercooler piping. Blow off valves. Turbos. It's ALL GOING. Count your pennies guys. This will be a once in a lifetime sale!!!!
 

·
Registered
Joined
·
99 Posts
i may want that exhaust and wat stage clutch? im interedted in flywheel as well and i will pick up too! lol only about a hour drive from me. depending on parts for motor i may take as well.
 

·
Registered
Joined
·
539 Posts
I will not clean you out that's for certain.

But i'd like to drop on by and buy something, ANYTHING, just not EVERYTHING.

I just picked up another 88 tonight.

It needs things, it's all stock, and you're 15 minutes from my house.

Let's do this, i have the cashola.
 

·
Banned
Joined
·
27,927 Posts
Discussion Starter #8 (Edited)
V3N0M951 said:
i may want that exhaust and wat stage clutch? im interedted in flywheel as well and i will pick up too! lol only about a hour drive from me. depending on parts for motor i may take as well.
The engine was rebuilt a few years ago and still has excellent compression. I have a spare block and head too. I'd throw those in if you buy the engine.

el seven said:
It needs things, it's all stock, and you're 15 minutes from my house.

Let's do this, i have the cashola.
I have an Erebuni front end and sideskirts that are RARE RARE RARE to come by. You won't see and Erebuni front end and sideskirts for sale again EVER. I'd like to get these sold locally rather than shipping them.

AndyVegan said:
do you have a front strut bar and tie bar? if so, i want them!
I have a Dutch626 Front strut bar (originally cost $200) that fits like OEM. I have a rear strut bar (OEM from the 88's) and lower tie bar. I also have a Ford Probe rear sway bar (17mm instead of the GT's 14mm)

SABBAi said:
got a link to a partout thread?
Not yet but I will send you my entire gauge cluster for FREE - with Procarparts reverse indiglo since the gauge bezel never made it to you.

V3N0M951 said:
i may want that exhaust and wat stage clutch? im interedted in flywheel as well and i will pick up too! lol only about a hour drive from me. depending on parts for motor i may take as well.
I'd love to not have to ship it. It's 3 inch mandrel bent (not crush bent) from the turbo back with a Magnaflow cat, Magnaflow resonator and Magnaflow exhaust. - it sounds awesome. I also have a 3 inch test pipe to ditch the cat, AND I also have a brand new cat WITH stock downpipe so all you do is swap it over for CA smog. I'll sell all of that together for one price. I paid $1200 for the exhaust total and I'll sell it for $600. IT's NICE!

Clutch - http://www.dxdracingclutches.com/html/mx-6.html it's the OFE and was $385 new. It hasnt been used. The Flywheel is a Fidanza and is new too.

I'll have an official part out thread and take pictures of everything. I just got a new camera today. I'd love to sell a lot locally if I can to avoid paypal and shipping.
 

·
Registered
Joined
·
1,066 Posts
I will take the Bridgeport mill and Hardinge lathe, as well as the lift.

Seriously, I may want to invest in some turbos and special service tools. Let me know BEFORE El Seven gets there. I have a 20 ft truck I can load up...... :)
 

·
Registered
Joined
·
4,157 Posts
The time has come for me to sell everything. I will be making an Official FOR SALE thread in the FS section within the next few weeks. This is DEFINATE.
Lol, Yet you made another thread about you making another thread selling a parts that is not forsale yet..... LOGIC?
 

·
Registered
Joined
·
657 Posts
I'll be passing threw cali in the next week, maybe on my way threw SD i can swing by and take a look at what you got left, after the locals rape you of parts.

Or Vemon can text me and sent me pics when he stops by.
 

·
Registered
Joined
·
539 Posts
I have an Erebuni front end and sideskirts that are RARE RARE RARE to come by. You won't see and Erebuni front end and sideskirts for sale again EVER. I'd like to get these sold locally rather than shipping them.
This has me dropping in, soon. I'm in 92117 now...
 

·
Registered
Joined
·
539 Posts
I will take the Bridgeport mill and Hardinge lathe, as well as the lift.

Seriously, I may want to invest in some turbos and special service tools. Let me know BEFORE El Seven gets there. I have a 20 ft truck I can load up...... :)
I have a 30ft truck lol, next! :lol:

j/k...
 

·
Banned
Joined
·
27,927 Posts
Discussion Starter #14 (Edited)
automan said:
Seriously, I may want to invest in some turbos and special service tools. Let me know BEFORE El Seven gets there. I have a 20 ft truck I can load up...... :)
What do you honestly need/want? I have my stock turbo in excellent condition for $150 with manifold (port and polish it)

el seven said:
This has me dropping in, soon. I'm in 92117 now...
If you want the front end and sideskirts call them and they're yours. $450 for the front end and sideskirts - thats a steal. You can pick them up any time. I live near SDSU.

 

·
Premium Member
Joined
·
18,203 Posts
Since you're dropping your prices in this thread, I'm assuming you have your F/S thread up. If not, hurry up because I'm going to close this thread down so you can make it. Just make sure you post it according to the rules ;)
 

·
Registered
Joined
·
1,066 Posts
What do you honestly need/want? I have my stock turbo in excellent condition for $150 with manifold (port and polish it)
I actually don't really need anything because of, say, a failed unit - just thinking ahead and I remember your mentioning that you had lots of turbos. I think I'd like to pick up a spare. Are you going to be around, this weekend?
 
1 - 20 of 109 Posts
Top