Mazda MX-6 Forum banner
1 - 2 of 2 Posts

· Registered
Joined
·
1,650 Posts
Well man iknow hot that feel. i have taken mine off a few times. this is how it goes:

0. remove the back side pannels from the car first ( i left that out )
1. fold down the seats.
2. remove the screw from the front part of the deck, there should be two in the middle and two on the sides.
3. you will have to remove the speakers, there are four screw that hold the plate that holds the speaker in place, remove those( you will need a short handled screwdriver)
4. remove the back break light in the window, there are two bolts ( i think that is all) side that off
5. you want to make sure you ahve the seat belts out the way also
6. then just pull and push and yank!!!!.


you will not break it dont worry, i hope!!! haha jk
 

· Registered
Joined
·
1,650 Posts
push up on the front and this should make it easier to move around. it should come a lose fromt he hooks that hold it down. you might want to get a friend to help you, i had to have help to get it out. grab a hold in the speaker hole and pull up there also. i hope you get it out, later
 
1 - 2 of 2 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top