[syliconex]

reinstalled intake manifold, now the throttle sticks some

i reinstalled my powdercoated intake manifold, looks kick ass btw.. anyways i got all the hoses and stuff plugged in right and everything. my problem now is that the throttle body sticks some. like if i rev up to 3 or 4 it'll stick there and slowly drop down, but if i pull up on the accelerator it'll drop instantaneously. so....i cleaned the damn thing out when i took off the manifold so thats not the problem, for some reason its just sticking some on acceleration.

 

[ToastiER]

Check your throttle position sensor, if this is not aligned right it can cause those problems.

 

[Mike 94PGT]

Check the throttle cable adjustment. Make sure there's slack in the throttle cable when it's closed.

 

[Racing_Extreme]

Yeah, what mike said. I read somewhere on here with a guy with the same problem and he attached the cable to the piece off of the throttle body and than screwed in the little metal bracket attached to the manifold that holds the cable, last, and that helped him out.