Mazda MX-6 Forum banner
1 - 1 of 1 Posts

· Registered
Joined
·
824 Posts
Try this:
1. clean the strip
2. roll down the window a bit and masking tape the edge
3. roll up the window, then use silicon sealers(not too much, use just enough)to fill in the cracks, and problem areas.[use clear or black sealer]
4. wait till the sealer harden, then remove the tape from the window.(must wait for the sealer to harden, otherwise you will have a big mess)

Never had to do it on my car, so I don't really if it really works or not. But I have heard others who did it.
 
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top